Ive looked in the forums but cant find a step by step with pics to install a

Greddy Automatic Turbo Timer with HKS mitsu harness on an EVO IX

 

Here you go man.........http://www.evomoto.com/tech_info.php...3_5&tech_id=24

 

thanks, followed those steps, was pretty easy just a pain in the *** to get under,



does anyone know what will happen if I want to cancel the turbo timer (interrupt the timer and put the key back in to start the engine) what will happen?

 

http://www.socalevo.net/forum/index.php?topic=29730.0

 

I can't see any problem with that. Just turn off your timer and start it up

 

u just put the key to the "ON" position...don't recrank the ignition... ..put it to ON ...drop the ebrake and drive off ...simple

 

ill give that a try,


one more question.......


to install the TT to the VSS line on the ECU? what pin do I tap it into, and also the e-brake?

 

ebrake is the purple/blue wire...should be only one line coming from the plug.



pin 86

 

so do I solder that aux wire from the TT to the ebrake and tape it up in order for the ebrake function to work?


I noticed that the auto turbo timer function works without having to tap into the VSS but can anyone confirm this?

 

yes ..u don't nee the vss function. It's optional...it's handy if you wanna test your vehicle speed and stuff...

yes, solder the line from the tt to the ebrake...other wise it wont shut off with the ebrake function...

 

your the man evoryder! thanks