i've been told in a couple of occations that you only install one cam in the evo ix ,is this true and why is they sell two

 

The intake cam is the mivec cam. Companys have just started to release the intake cams now. So yes, at first you could only get the exhaust cam

 

This was originally true, because the MIVEC made it so you could only replace one cam. Now, however, MIVEC specific cams have been made, which is why it is now possible to replace both cams.

 

since when is this ,because i purchased a "set" of cams and i dont know if the mivec "cam"is one of them or did i purchase a set before the mivec cam was made?

 

Whose cams did you buy?

 

If you ordered them for a IX then your good. +1 on who's cams only a few vendors offer them as of right now

 

Well, duh, I'm pretty sure you know if you bought IX cams or not...aren't you?

Please tell us these "locations" and who you bought the cams from, because we need to organize a lynch mob.

 

i can only tellya its a very reputable vendor but i was asking because i bought them when they first came out ,thats why i ask , cause if they just came out with the mivec chances are i dont have the mivecs but just a regular pair of cams ,thanks for the concern,im still to reflash since these cams wouldnt generate hp ,ill explain as we go,

 

There is no "regular" set of cams for the IX. They are either IX cams, or they aren't. I can't imagine you buying cams not made for the IX if you have a IX. IX cams have been out for 5-6 months. Over time, more have been released with GSC coming a month or so ago and Cosworth just in the last week or two.

I have no idea what your last sentence means - makes no sense to me.

 

???

 

ok heres the deal ,my mods are(mbc,tbe,greddy bov ,and the cams)this is before the gt35,so we went to dyno it,and it comes up to 360+ ,so i bring up the tuner for the reflash he gives about 10 to almost 20 passes and it wont go any further than 360+(plus being 2-3 hp more)so the tuner tells me it may be the intake cam,i should probably remove it since someone he knows had the same experience,so i did and took it to the dyno again to find out the car went back to 330+,although the graphics read that the car is running very rich ,some say this is not the problem,others say it could be timing ,i myself have no idea, i hope somebody can help me ,

 

What IX cams have been out for 5-6 months?

 

wartalon i know that they've been out for a while now ,and they are for the ix mivec

 

The intake cam is the mivec cam. Companys have just started to release the intake cams now. So yes, at first you could only get the exhaust cam

 

TurboTrix.