Buschur TBE fitment prob's HELP
Buschur TBE fitment prob's HELP
My friend is installing the BR TBE with test pipe and bullet muffler for me right now. He is at a fabrication shop right now, and says first that the downpipe does not fit the ebay o2 housing. Second the downpipe is flanged on both ends, but there is no other part that is flanged. He also said it is about a 1 and half feet from clearing the back bumper. Is there 4 or 5 pipes that are supposed to come with this exhaust? I have downpipe, midpipe, testpipe, and muffler section. I have AMS coming to tune tomorrow, so I need to get this solved quickly.
Thanks for your help!
Thanks for your help!
Last edited by Gofaster52; Jul 10, 2007 at 10:31 AM.
It does fit the o2 housing, but the flanges do not mate flush.
The test pipe should be flanged on one end and slip-fit on the other. The flanged site goes to the DP, and the slip-fit side goes to the cat-back. The exhaust should fit perfectly and stick out just a little beyond the bumper.
The test pipe should be flanged on one end and slip-fit on the other. The flanged site goes to the DP, and the slip-fit side goes to the cat-back. The exhaust should fit perfectly and stick out just a little beyond the bumper.
Trending Topics
Account Disabled
iTrader: (38)
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
no problem... wanna know what it's going to sound like?
stock cams:
Click here to see Video
HKS 280 cams
Click here to see Video
stock cams:
HKS 280 cams
Yes, when I did my review on the Buschur catless TBE w/Bullet muffler, it was not only a lot lighter than stock, but it was also a full 10.0 lbs lighter than my catless Megan TBE.


