Kevin Knight

iTrader: (15)

i couldnt find any real good explnations on how to hook up the 12v to the gauge. some people have said you need to get a hook up wire at autozone or something. can anyone explain. i want to hook it up into the fuse box and not split any wires? can someone explain what i need to do? thks

Lancematic

iTrader: (10)

Add-a-fuse link from pepboys or autozone plugs into a socket for an existing 12v fuse and replaces that fuse while adding a fused hot wire to connect to. Ask at the parts counter for one for mini fuses

spooch

iTrader: (4)

did the same thing for mine today, the gauge works well, needed to zip tie multiple times, i ended up using 4 zip ties to hold the boost hose on the tee, i had 2 or 3 on and at 23lbs it was flying off

Kevin Knight

iTrader: (15)

i still dont understand how to wire the gauge up. the kit comes with nothing. and iv never done any type of wireing before. what do i need to go buy?

Kdash106

iTrader: (11)

i just installed my electronic Boost gauge last night, it was my first wiring DIY too. very easy i just tap in to the digital clock harness. it's got all the wire you need to hook it up. i used to have a AM boost gauge, i think it only have 2 wire. the ign, and the light. but i didn't install that.

Usedcarfinders

iTrader: (1)

I know you said you do not want to splice, but if you simply splice into the windshield wipers wire and ground it its a nice solid connection that shuts off when the car is off