EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

Stock Cat goes which way?

Thread Tools
 
Search this Thread
 
Old Jul 26, 2007 | 02:16 PM
Share
  #1  
80210's Avatar
80210
Thread Starter
Evolved Member
iTrader: (23)
 
Joined: Oct 2006
Posts: 587
Likes: 0
From: Denver, CO
Stock Cat goes which way?
Ok... so the stock cat on the IX has bolts that are welded on. Do they go into the DP or into the CB?

I know the 02 port faces the passenger side.... but the attached bolts go into which?
Reply
0
Old Jul 26, 2007 | 02:17 PM
Share
  #2  
TouringBubble's Avatar
TouringBubble
Evolved Member
iTrader: (2)
 
Joined: Jul 2006
Posts: 2,639
Likes: 3
From: Chelsea, AL
I've only unbolted the DP side of mine, but the bolts were not welded. I'd bet that the attached bolts point toward the rear.
Reply
0
Old Jul 26, 2007 | 02:21 PM
Share
  #3  
adamhw's Avatar
adamhw
Evolving Member
 
Joined: Jul 2004
Posts: 289
Likes: 0
From: us
Down.

As in on the floor, really it can go anywhere as long as it's not on the car restricting the airflow . Sorry, someone had to say it.
Reply
0
Old Jul 26, 2007 | 02:22 PM
Share
  #4  
80210's Avatar
80210
Thread Starter
Evolved Member
iTrader: (23)
 
Joined: Oct 2006
Posts: 587
Likes: 0
From: Denver, CO
can anyone confirm?
Reply
0
Old Jul 26, 2007 | 04:09 PM
Share
  #5  
oldscholevo's Avatar
oldscholevo
Evolving Member
iTrader: (2)
 
Joined: Mar 2006
Posts: 425
Likes: 0
From: here
Originally Posted by 80210
Ok... so the stock cat on the IX has bolts that are welded on. Do they go into the DP or into the CB?

I know the 02 port faces the passenger side.... but the attached bolts go into which?
they go into the cat back
Reply
0
Old Jul 26, 2007 | 04:10 PM
Share
  #6  
oldscholevo's Avatar
oldscholevo
Evolving Member
iTrader: (2)
 
Joined: Mar 2006
Posts: 425
Likes: 0
From: here
Originally Posted by 80210
Ok... so the stock cat on the IX has bolts that are welded on. Do they go into the DP or into the CB?

I know the 02 port faces the passenger side.... but the attached bolts go into which?
and the o2 hole should face up on the 9
Reply
0
Old Jul 27, 2007 | 11:41 AM
Share
  #7  
80210's Avatar
80210
Thread Starter
Evolved Member
iTrader: (23)
 
Joined: Oct 2006
Posts: 587
Likes: 0
From: Denver, CO
It has to go this way correct?
Reply
0

Trending Topics

Old Jul 27, 2007 | 12:45 PM
Share
  #8  
travman's Avatar
travman
Evolved Member
iTrader: (26)
 
Joined: Oct 2005
Posts: 1,712
Likes: 0
From: Pittsburgh
The rear of the cat has studs w/ nuts and they attach to the catback and the O2 sensor port points up....
Reply
0
Old Jul 27, 2007 | 01:40 PM
Share
  #9  
80210's Avatar
80210
Thread Starter
Evolved Member
iTrader: (23)
 
Joined: Oct 2006
Posts: 587
Likes: 0
From: Denver, CO
wonderful. Do you think I should use a 0.5'' bit to widen the CB holes so it will fit?
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Can i do downpipe and high flow cat with stock exhaust ?
04Evo851374
Evo X Engine / Turbo / Drivetrain
4
Apr 7, 2011 04:29 AM
minimal budget: cat-back or metal substrate HFC?
mrfred
Evo Engine / Turbo / Drivetrain
8
Jun 12, 2006 06:08 PM
Need help FAST.
Nesiop
Automotosports - Illinois
21
Jul 25, 2005 09:53 AM
Which test pipe will work with the stock exhaust system?
RSGuy
Evo Engine / Turbo / Drivetrain
5
Sep 14, 2004 12:44 PM
Cat Delete?
Rinse
Evo Engine / Turbo / Drivetrain
10
Nov 14, 2003 01:16 PM
Back to Subforum
Evo General
View Next Unread
Another Evo into the 8's on boost! Mike Reichen's Evo 2




Advanced Search

All times are GMT -7. The time now is 02:41 AM.