i work 3 jobs and barley have time to work on my car. so i contacted a shop near me (alantic motorsports) and they want $350 to install a hallman mbc and fuel pump. to me that seems a bit to much. looks like i might try to tackel this project by myself. i just have a quick questions.

1. is it ok to drive on the walbro fuel pump without a tune?

thks

 

I say check out the DIY threads on here.

 

DIY,yes it's ok to drive with the walbro without tune.

 

the prices for all installs are high, ams charges about 100 for a pump install

 

$50 pump $50 BC....MAX Maybe $150,,,
There both real easy and a quick install....Did both myself...

 

I'd pay $100 max

 

between the both your talking maybe 1hr to 1 1/2 tops. As stated you should pay no more than 100

 

these are easy installs espeically with all the write-ups on them. no need for a re-tune for just a pump install

 

Just make sure your fuel tank is close to turning the E light on. I've heard that could get rather...sloppy.

 

I did my pump with 1/2 tank no problem. The only fun part is getting that retaining ring on/off. I sware Mitsu made the access panel about an inch too small on purpose!!

 

ill do them both for you for 100 bucks

 

diy = free

 

its safe
http://evomoto.com/tech_info.php?tPa...6167b2a3597a0f