i'm looking for a PSI boost gauge that will match the oem evo 9 mr gauges. i want something like the defi d gauges, but i dont want to get a control unit. i just want to be able to splice the gauge into my existing wiring harness. also, are the oem gauges 52mm? i'm only gonna be boosting 21-22 psi and the stock mr boost gauge goes up to about 21.5 psi. i was thinking i could get away with using the stock gauge, but i realized that i wouldn't be able to tell if i was over boosting.

 

The VDO Vision series looks very similar, but they are back lit. Great gauges as well. Quite accurate and affordable.

 

You want the Omori boost gauge then....helped with install on my buddies (I-Dom-In-8).

 

Here is a pic on his car:

 

^^^ that gauge looks great! is that a 60mm because it looks slightly larger than the stock gauges. do they make them in 52mm? does the back light match the stock gauges as well? i guess i could just try to solder led's on it if it's possible.

 

where can i buy it? i tried searching on yahoo, but it just gives me a lot of installation guys and stuff.

 

+1 on the Omori

 

The Stewart Warner gauges from 42nd Draft Designs are also a great option.

 

I want to say it was bought through Subydude.

 

Thanks hector for letting me know about this..

Its the 45mm gauge and i got it from Jspec

Heres another pic..

 

IIRC didn't you originally order through Subydude?

 

LOL..yeah i did but it was on backorder and i didnt want to wait

 

Couple of things...you will have to use a dremel to make the stock hole a little bigger, Not a whole lot so dont worry.. the link i put up is for full color, you can go from green,red,blue,white and so on..hope this helps..

 

He PMed asking that info..... I got you covered Kevin!

 

haha thanks a lot guys! this helps alot. i assume this gauge will just splice into the existing wiring harness?