Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

Can't cross 25psi on a ATP GTX35R Kit

Thread Tools
 
Search this Thread
 
Old Feb 13, 2011 | 10:53 AM
  #1  
fastparts's Avatar
Thread Starter
Newbie
 
Joined: Feb 2011
Posts: 6
Likes: 0
From: Trinidad
Can't cross 25psi on a ATP GTX35R Kit

Hello!!!
I recently installed the new ATP turbo bolt-on EVO 8 GTX35R kit. The car (EVO 7) has forged .020 Wiseco pistons, Eagle rods, and crank, sotkc sized ferrera SS valves and a set of Tomei type R 270 cams. Its got the drop-in K&N filter and a chinese Greddy Style TB exhaust system. It has a ECUtek flash.
My problem is that the engine doesn't want to cross 25 lbs. of boost. The car made 393whp @ 25psi. The kit comes with a 14.7psi internal gate and I got the extra froma boost tee.
I tried to get more boost by pulling the vaccum hose to the wastegate actuator but no effect on boost. Any help will be greatly appreciated.
I am very new to everything forum wise, but from the reading you guys are a very very informed bunch.
Reply
Old Feb 13, 2011 | 10:55 AM
  #2  
erald01's Avatar
Evolved Member
iTrader: (5)
 
Joined: May 2009
Posts: 1,081
Likes: 1
From: Detroit, MI
check for boost leaks...you must have a huge leak somewhere.
Reply
Old Feb 13, 2011 | 11:03 AM
  #3  
fastparts's Avatar
Thread Starter
Newbie
 
Joined: Feb 2011
Posts: 6
Likes: 0
From: Trinidad
I did a boost test up to 3 bar and everything stayed intact. I have atheory that the internal wastegate flap is being blown open by exhust pressure..... Does that make any sense?
Reply
Old Feb 13, 2011 | 11:19 AM
  #4  
fastparts's Avatar
Thread Starter
Newbie
 
Joined: Feb 2011
Posts: 6
Likes: 0
From: Trinidad
I did a boost test up to 3 bar and everything stayed intact. I have atheory that the internal wastegate flap is being blown open by exhust pressure..... Does that make any sense?
Reply
Old Feb 13, 2011 | 12:46 PM
  #5  
Evotech8's Avatar
Evolving Member
iTrader: (4)
 
Joined: Nov 2004
Posts: 397
Likes: 0
From: SJ, CA.
Did you try tightening the wastegate actuator.



.
Reply
Old Feb 13, 2011 | 12:55 PM
  #6  
05VIII's Avatar
Evolved Member
iTrader: (17)
 
Joined: Jun 2005
Posts: 862
Likes: 2
From: Dallas
what are you using for boost control?

are you still using stock intake?
Reply
Old Feb 13, 2011 | 02:51 PM
  #7  
EvoDom's Avatar
Evolved Member
iTrader: (7)
 
Joined: Oct 2007
Posts: 1,238
Likes: 0
From: Joisey Shore
Try tightening the waste gate acuator. You could go with a MAP down pipe with a tial 38mm gate to control boost better.
Reply
Old Feb 13, 2011 | 02:54 PM
  #8  
still*boostn's Avatar
Evolving Member
iTrader: (15)
 
Joined: Oct 2007
Posts: 422
Likes: 0
From: Houston, TX
what intake r u running? stock rubber one?

with the atp turbo it would seem that the stocker wouldnt work, but you said you have a drop in K&N,..

also what boost controler r u running?
Reply
Old Feb 13, 2011 | 03:48 PM
  #9  
Boost Demon's Avatar
Evolving Member
Veteran: Air Force
iTrader: (22)
 
Joined: Jan 2006
Posts: 283
Likes: 9
From: Oahu, Hawaii
Waste gate sounds like it's being blown open, try tightening it up.
Reply
Old Feb 13, 2011 | 08:11 PM
  #10  
steven121's Avatar
Evolved Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (27)
 
Joined: Oct 2009
Posts: 2,787
Likes: 12
From: TX
It wouldn't be a leak because his car would misfire or run really rich

Check your wastegate and if you don't have a boost controller I would get one. You should be able to either change out springs like the forge wastegate or get a stronger wastegate. Make sure ur tune is good got that much boost
Reply
Old Feb 14, 2011 | 02:08 AM
  #11  
fastparts's Avatar
Thread Starter
Newbie
 
Joined: Feb 2011
Posts: 6
Likes: 0
From: Trinidad
I try that. It does make sense!
Reply
Old Feb 14, 2011 | 07:18 PM
  #12  
mc14's Avatar
Evolving Member
iTrader: (8)
 
Joined: Dec 2008
Posts: 162
Likes: 0
From: Chicago
try a boost controller and tial wastegate...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fabiano
Evo Engine / Turbo / Drivetrain
0
Mar 13, 2016 01:01 PM
wrx_ua
Evo X Engine / Turbo / Drivetrain
2
Jun 23, 2015 03:20 PM
TDV
Evo X Engine / Turbo / Drivetrain
20
Oct 10, 2013 08:31 AM
MRadjahoe
Evo Engine / Turbo / Drivetrain
4
Mar 31, 2012 10:56 AM
Mines Evo IX
Evo Engine / Turbo / Drivetrain
3
Sep 2, 2007 11:04 PM




All times are GMT -7. The time now is 06:29 AM.