Stock cams?
#1
Account Disabled
Thread Starter
Join Date: Feb 2012
Location: usa
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Stock cams?
I just took my car to replace head gasket does anyone know if these are stock cams or aftermarket?
They have stuff saying k 6 and 6b24
I will post pic later
They have stuff saying k 6 and 6b24
I will post pic later
#6
Evolved Member
iTrader: (8)
it depends on what size cams you want to put in. if your going with a 264 or the gsc S1's then you will be ok with just putting the cams in without anything else if your on a budget. If you want a 272 then its smart to upgrade the springs retainers and seats. and might as well replace the timing belt while at it
#7
Account Disabled
Thread Starter
Join Date: Feb 2012
Location: usa
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
and yeah iam replacing the timing belt and head gasket too and all those belts around there.... what are best ones that dont need to retainers replace? i want to buy some..
Trending Topics
#8
Account Disabled
Thread Starter
Join Date: Feb 2012
Location: usa
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Ok so i just took the head off and the head gasket is blowen on the side... The block or the head dont look like it is damaged. Do i need to do anything else to the head?
#15
Evolved Member
iTrader: (21)
Join Date: Jan 2005
Location: SoCal - Where pimpin aint easy
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Stock hollow cams (They are NOT DRILLED, jeez). You should get your head/block machined, but at the very least have it checked.
Last edited by boostless; Feb 27, 2012 at 12:12 AM.