Video says it all, car studders and has no power above 3800, even if idle and cruise is good. Please watch, any help is appreciated...

 

nothing...?

 

Have you checked the pins in the connector and the maf for looseness and checked for any exposed wires in the loom in the area of where you're grabbing and pulling that could cause a short. Appears the maf is working properly right up until you pull on the wires which makes me think short or the pins lose contact.

 

Agreed, also check if the actual connector plug is dirty.

 

pshh just do speed density setup and ditch the MAF

 

like your idea SLOWSRT, this car is driving me nuts. Im gonna split the little wire loom thing and look. The connector is clean and has that connector grease stuff on it