What's up EvoM,
I have a evo ix that's been giving me starting problems. Checked starter, battery, ignition switch and traced it down to the starter relay. Sometimes there's enough current to start the car. I saw Teds post (https://www.evolutionm.net/forums/evo-general/627390-intermittent-starting-problems-mysterious-cause-identified-fixed-10.html) post #148 with a solution. I have everything I need to start the job but my wiring was alittle different. In his post there is one wire coming from #5 pin. While on my car there are 2 coming from it. My question is do I splice both to add the new relay? Here's a pic of mine, black/red wire. https://m.flickr.com/#/photos/142814421@N07/26551465914/