Evo not starting
#1
Newbie
Thread Starter
Join Date: Jan 2015
Location: Sparks
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Evo not starting
Was driving the car normal beings it's a brand new build, when the car decided to just shut off. Pumps weren't working. Check all fuses and relays noting wrong.
Got it towed home and hard wired the pumps and now pumps work but injectors are not working and no spark. Plugged a scanner into it to see if it was the crank position sensor but the scanner will not communicate. Called my tuner over and now his laptop won't communicate to the obd2 ether. A 20amp fuse was blown under the hood so replaced that and still same issue.
Any insight to what's going on? Or where to start looking?
Got it towed home and hard wired the pumps and now pumps work but injectors are not working and no spark. Plugged a scanner into it to see if it was the crank position sensor but the scanner will not communicate. Called my tuner over and now his laptop won't communicate to the obd2 ether. A 20amp fuse was blown under the hood so replaced that and still same issue.
Any insight to what's going on? Or where to start looking?
#6
Evolved Member
iTrader: (1)
Was driving the car normal beings it's a brand new build, when the car decided to just shut off. Pumps weren't working. Check all fuses and relays noting wrong.
Got it towed home and hard wired the pumps and now pumps work but injectors are not working and no spark. Plugged a scanner into it to see if it was the crank position sensor but the scanner will not communicate. Called my tuner over and now his laptop won't communicate to the obd2 ether. A 20amp fuse was blown under the hood so replaced that and still same issue.
Any insight to what's going on? Or where to start looking?
Got it towed home and hard wired the pumps and now pumps work but injectors are not working and no spark. Plugged a scanner into it to see if it was the crank position sensor but the scanner will not communicate. Called my tuner over and now his laptop won't communicate to the obd2 ether. A 20amp fuse was blown under the hood so replaced that and still same issue.
Any insight to what's going on? Or where to start looking?
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
phyzy
Evo Engine / Turbo / Drivetrain
20
Feb 16, 2023 05:38 PM
kaj
Evo Engine / Turbo / Drivetrain
16
Feb 12, 2012 10:40 AM
EvolutionTheory
Evo X Engine Management / Tuning Forums
10
Nov 15, 2009 06:25 AM
Kiartiger
Lancer Troubleshooting
2
Feb 28, 2009 12:12 AM