I just bought a Greedy turbo timer and am installing it and have the speed sensor wire, ebrake wire hooked up right but have no clue what to hook the 3 wires that come of the main harness. I tried the one on the ignition that has a constant 12v source except when the key is off but i cant get it to work. Please help im lost

 

Haha, "Greedy" Turbo-timer

You mean Greddy, yes?

 

Yes, sorry. Good catch on that one.

 

The wire goes like this ----< connect the ---- part to your timer, and < part connects between the ignition wires, they bridge it.

The wires under the steering column. The black and white one on the left side of the column is what you're looking for.

do a search on google.com There is a wiring direction for Apex. type in "mitsubishi evolution turbo timer apex"

and you'll get the colored picture instruction. It's fairely good.

 

So tap the green wire on the turbo timer harness onto the black and white one. Thank you for helping me, i have my car torn apart and want to get it back toghether.

 

First do you have harness? for your turbo timer? Iam using harness from 95-99 turbo eclipse/talon fits perfect, i got it from ebay for really cheap black is ground i think color brown goes to your handbrake.... do search here i think someone posted allready and comes with pictures.

good luck.

 

I dont have the 2g harness, i am trying to hard wire it. I wish i could get the harness but couldnt for about a week at least and i have the car tore apart now and want to get it done.

 

well it would be less pain... well its up to you. good luck

 

I know, i wish i would of known ahead of time but now im this far into the thing and am almost there, ahhh i hate wiring. Thanks again for your help !

 

You will need to tap into the ECU if you want to run teh speed function. DO a search for the ECU pins.

 

I got that one luckily, its pin 86 for anyone in the future go to RRE's web site.