turboevo8

iTrader: (3)

Sorry, I originally posted this in the wrong forum, so I moved it here.
I mocked up a design I had in mind for making my own mini battery tray and mounts. It costed me about $35.00. I made it all out of Stainless Steel. I went to the sheet metal place and they gave me a bunch of sheet metal for about $10.00 then I had everything bent up for about $25.00.
I even have a template of it in photoshop. I might even be able to pass it along to people if they really want it, PM me. All you have to do is trace, cut it out and have someone bend it for you unless you have access to a sheet metal bender? Anyways here are some pictures. If I was to do it all over or to see it, I would design it a little different, but let me know what you think.






Enjoy. Save yourself over $150 by doing it yourself if you can.

gt40

iTrader: (1)

great job- always up for making stuff...

memo3

iTrader: (40)

Nice job!

Aspired

Nice work - yeah those kits are pretty spend for a simple tray - I'll be making one of these also or a relocation kit possibly.

craziazzmofo66

iTrader: (3)

lookin good!! ill eventually get a mini battery.....and this is definatly a good idea that i can easily pull off.....for free!! yes! lol

Pure Playaer

iTrader: (14)

damnit i could of done this before i bought my buschur mini battery kit!

great job on it thou!

reggiesd

iTrader: (17)

wow nice job! what about you just post the template here and we can make this a sticky? plus..where can you get the smaller battery and what kind?

ninja808

iTrader: (9)

Great Job! Will definitely look into doing this for a next project

turboevo8

iTrader: (3)

For some reason I could not post the attachment here. It maybe too large or something? NOt sure, but feel free to sticky it.

You can down load the template here:
http://www.turboevo8.com/minibattery/

This is made for an Odysessy 680 or simular. You can easily adjust it for any simular battery.

Let me know if you have any questions or if you build it. I'd like to see an image of it.

EVOllie

iTrader: (10)

Looks good, I'll shoot you a PM on the templet cause i was about to make mine own also. Would be a lot easier if i already had a templet, plus i like how you folded the base of the tray.

I was going to run a different battery though. It looks like it should work though.

turboevo8

iTrader: (3)

You can download the template from my website in the signature below. Which battery are you going to use?

EVOllie

iTrader: (10)

Braill...and for the carbon fiber junkies, they make them in carbon fiber now.
http://www.brailleauto.com/
but the ones im looking at range from 179-199

burgers22

Anyone have a copy of the template?