Aeroquip flush hood latch - DIY install
Apr 23, 2007, 03:37 PM
#1
Newbie
Thread Starter
iTrader: (7)
Join Date: Jul 2006
Location: Emerica
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Aeroquip flush hood latch - DIY install
For those of you who are not familiar with the Aerocatch hood latch system. See the attached link:
www.aerocatch.com
I purchsed my hood pins here and got them in 3 business days: (Aerocatch is in the UK)
www.coastfab.com/specials.html#aerocatch
I installed them in my CF hood with a buddy and did a little write up. Not something for those who are not comfortable with cutting or not good with a tape measure. If there is any interest I will make a copy of the template that I used to fab a custom bracket. See the below link for the instructions:
www.rgcmotorsports.com/hoodpininstall.html
Your feedback is welcome.......
www.aerocatch.com
I purchsed my hood pins here and got them in 3 business days: (Aerocatch is in the UK)
www.coastfab.com/specials.html#aerocatch
I installed them in my CF hood with a buddy and did a little write up. Not something for those who are not comfortable with cutting or not good with a tape measure. If there is any interest I will make a copy of the template that I used to fab a custom bracket. See the below link for the instructions:
www.rgcmotorsports.com/hoodpininstall.html
Your feedback is welcome.......
Thread
Thread Starter
Forum
Replies
Last Post
Lightsaber
Evo X General
3
Jul 27, 2016 05:01 PM
