re installing an evo 8 turbo
re installing an evo 8 turbo
is there any torque specs for the exhaust manifold? also will i have to prime the turbo?
step by step re installing a stock 8 turbo is what i need help with.
step by step re installing a stock 8 turbo is what i need help with.
Last edited by 42revoincali; Nov 3, 2010 at 11:01 AM.
You don't HAVE to prime the turbo, although it is highly reccomended anytime a turbo is installed on a car, reguardless if its been ren before or not. Take 10 seconds and prime it.
By searching "turbo install" in this very section we are in right now this came right up...
https://www.evolutionm.net/forums/ev...all-video.html
drain oil, drain coolant, remove radiator, unbolt everything, use new gaskets, use anti-seize, see service manual for torque specs.
https://www.evolutionm.net/forums/ev...all-video.html
drain oil, drain coolant, remove radiator, unbolt everything, use new gaskets, use anti-seize, see service manual for torque specs.
Thread
Thread Starter
Forum
Replies
Last Post
rydogg008
Evo X How Tos / Installations
11
Jan 31, 2015 06:19 PM
CFMP RAblue
Mitsubishi TC-SST Discussion
0
Sep 20, 2014 03:02 PM
