Notices
Evo How Tos / Installations Post or link to your detailed how to / installation articles in here. If you have any questions regarding the how tos, feel free to post them in the Request sub-forum.

How to install map/overhead lights

Thread Tools
 
Search this Thread
 
Old Dec 18, 2013 | 07:54 PM
  #1  
wc351's Avatar
Thread Starter
Evolving Member
10 Year Member
iTrader: (1)
 
Joined: Oct 2013
Posts: 243
Likes: 1
From: Georgia
How to install map/overhead lights

First locate the notch in the lens next to the off/door/on switch. I used a small pick to pry the it down.





Next its a good idea to lower the panel and change the bulbs, it can be done by doing one at a time but its much faster to lower the panel. There are two bolts next to the bulbs and a screw inside the flip down.





Once all three are changed (or one) then you must re-install the panel for the lights to be grounded properly and turn on and re-install the lens.





Now the center light can be done. Find the notch in the lens next to the switch and pry it down like the other one.



This light panel has two screws that can be removed to lower the panel for easy bulb change.



Once changed just reverse the process and turn on all of the lights to make sure that they are working properly. If one doesn't work then rotate it 180 degrees and it should. Now enjoy your new lights.

Reply
Old Dec 18, 2013 | 08:27 PM
  #2  
missmyfdevo8's Avatar
Newbie
 
Joined: May 2013
Posts: 27
Likes: 0
From: oregon
What bulbs did you use? I always wanted to change mine like that.
Reply
Old Dec 18, 2013 | 08:30 PM
  #3  
wc351's Avatar
Thread Starter
Evolving Member
10 Year Member
iTrader: (1)
 
Joined: Oct 2013
Posts: 243
Likes: 1
From: Georgia
Originally Posted by missmyfdevo8
What bulbs did you use? I always wanted to change mine like that.
I used these, and had some left since I haven't changed the tag lights out yet.

http://www.ebay.com/itm/6x-White-LED-Lights-Interior-Package-for-Lancer-Evo-8-9-/270794526777?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f0c9c9039&vxp=mtr
Reply
Old Dec 20, 2013 | 06:52 AM
  #4  
w33zy's Avatar
Newbie
iTrader: (1)
 
Joined: May 2012
Posts: 8
Likes: 0
From: Minnesnowta
Originally Posted by wc351
I used these, and had some left since I haven't changed the tag lights out yet.

6X White LED Lights Interior Package for Lancer EVO 8 9 | eBay
I've had these same ones in for over a year and they have not failed yet fwiw.
Reply
Old Dec 20, 2013 | 07:19 AM
  #5  
wc351's Avatar
Thread Starter
Evolving Member
10 Year Member
iTrader: (1)
 
Joined: Oct 2013
Posts: 243
Likes: 1
From: Georgia
Originally Posted by w33zy
I've had these same ones in for over a year and they have not failed yet fwiw.
Thats good to know. I was wondering how long they would last.
Reply
Old Dec 20, 2013 | 01:30 PM
  #6  
w33zy's Avatar
Newbie
iTrader: (1)
 
Joined: May 2012
Posts: 8
Likes: 0
From: Minnesnowta
Originally Posted by wc351
Thats good to know. I was wondering how long they would last.
Yeah. They look much better than stock.. I have rear license plate ones and parking lights from a different vendor on ebay (don't recall who).. they were a different story - one of the parking lights was DOA, and the replacement they provided now flickers - the license plate led's, one burnt out in under 6 months : (

Lesson: some vendors on ebay sell crappy LEDs lol.
But these ones listed above haven't failed yet!
Reply
Old Dec 20, 2013 | 02:35 PM
  #7  
missmyfdevo8's Avatar
Newbie
 
Joined: May 2013
Posts: 27
Likes: 0
From: oregon
Looks good buddy.
Reply
Old Dec 27, 2013 | 09:52 AM
  #8  
yesevo's Avatar
Evolved Member
iTrader: (13)
 
Joined: Jan 2005
Posts: 1,323
Likes: 0
http://www.lexenauto.com/product-p/w2.htm

I boguth this one today, and will see how it looks on my evo.
Reply
Old Dec 27, 2013 | 10:32 AM
  #9  
memphis69's Avatar
Newbie
iTrader: (9)
 
Joined: Nov 2013
Posts: 73
Likes: 0
From: earth
nice mod, thanks!
Reply
Old May 3, 2014 | 11:26 PM
  #10  
GSXPimp's Avatar
Newbie
iTrader: (3)
 
Joined: Jan 2010
Posts: 27
Likes: 1
From: Mid-Michigan
I'm picking these up very soon
Reply
Old May 9, 2014 | 03:17 PM
  #11  
pr0phet's Avatar
Evolving Member
 
Joined: May 2007
Posts: 122
Likes: 0
Here's mine in red (plus start up sequence with gauges/radio lighting).

https://www.dropbox.com/sh/ppwhmz2gn...NPdUtxxOpx39la

Last edited by pr0phet; May 9, 2014 at 03:29 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rexpeed
EvoX 'For Sale' Exterior Styling
1853
Sep 20, 2019 12:33 AM
evowner17
For Sale - Part Outs
75
May 24, 2016 12:50 PM
YoJeano
For Sale - Interior / Exterior / Sound / Styling
4
Dec 5, 2015 06:43 PM
ReggiEVOx
Evo X General
5
Jun 22, 2014 01:22 PM
dkorr
Evo X How Tos / Installations
6
Feb 4, 2014 02:40 PM




All times are GMT -7. The time now is 02:02 PM.