Ichiba Wheel Spacers
We sell hubcentric rings for EVO application with NT03s (67mm-72.2mm). The spacer itself needs to be hubcentric to the hub of whichever car its going on, not the wheel; that's what hubcentric rings are for 
The blue ring is the hubcentric ring for the wheel, the silver ring in the center comes with 10mm+ spacers to make them hubcentric. The ICHIBA 5mm spacer does not come with this piece, it comes bored to the proper size per application.
You have PM!
The blue ring is the hubcentric ring for the wheel, the silver ring in the center comes with 10mm+ spacers to make them hubcentric. The ICHIBA 5mm spacer does not come with this piece, it comes bored to the proper size per application.
You have PM!
There are a lot of questions about which size spacers to go with and how they look but not many pictures so I figured I would share this picture here. Hopefully it is useful to someone. It is my EVO 8 with stock Enkei's and 245/40/17 tires. I used the Ichiba Version II, 17mm spacers up front and the 10mm Ichiba version I, 10mm spacers in the rear with extended studs. They line up perfect, I am very happy with them!
There are a lot of questions about which size spacers to go with and how they look but not many pictures so I figured I would share this picture here. Hopefully it is useful to someone. It is my EVO 8 with stock Enkei's and 245/40/17 tires. I used the Ichiba Version II, 17mm spacers up front and the 10mm Ichiba version I, 10mm spacers in the rear with extended studs. They line up perfect, I am very happy with them!
Thanks for sharing your setup!
The best way to determine how much width of a spacer you need is to measure from the top, outer-most part of the tire toward your fender. This is the best way to get an idea of how much spacer width you will need to make your setup as flush as you'd like.
You have PM, and all others have been replied!
You have PM, and all others have been replied!