Pic's of Enkei RPF1's 17x10 on RR Evo
#47
Evolved Member
iTrader: (12)
Join Date: Jun 2006
Location: SJ, CA
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to bring this up back from the dead but I'll have this setup done this weekend granted fires in socal permit. But I'm also including the KW suspension with 17x10 RPF1 powercoated BLACK on my tb evo. I know it;s a +18 offset up front and 3? something in the back. Mr. Robert suggested it so. Same size tires as the original poster. We're hoping for the car to sit right on the tires with no gap or rubbing besides really tight turns. Fenders massaged of course.
I think the OP is running 17x10 +38 all around. 17x10 +18 with a 13mm spacer would result in him needing a wide body kit lol
#48
Does anyone have a pic of these wheels in gold... on a red car? what size should i go with on a stock suspension car? my car isnt lowered at all i want it to fill out the wells nice, but dont want any rubbing or have to use a spacer
#53
Evolving Member
iTrader: (22)
Join Date: Jul 2006
Location: Chicago
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
those are +38 man idk who told you those are +18
i looked close at your pix on the back of the wheel it sais 17x10j 38
not 18
although enkei sells 17x10 +18 now that be interesting
i looked close at your pix on the back of the wheel it sais 17x10j 38
not 18
although enkei sells 17x10 +18 now that be interesting
#56
Hi guys,
I was thinking of getting a set of 17x10 +18 offset all around for my evo 9....
would that fit?
what would i need to do:
1- roll the fenders yes/no?
2- cut the fenders yes/no?
3- need spacers yes/no?
4- need wheel studs yes/no?
5- need open lug nuts yes/no?
and what kind of camber needed, personally i love -3 to -4.5 for autocross
Thanks guys!
I was thinking of getting a set of 17x10 +18 offset all around for my evo 9....
would that fit?
what would i need to do:
1- roll the fenders yes/no?
2- cut the fenders yes/no?
3- need spacers yes/no?
4- need wheel studs yes/no?
5- need open lug nuts yes/no?
and what kind of camber needed, personally i love -3 to -4.5 for autocross
Thanks guys!
#59
Evolving Member
iTrader: (25)
Hi guys,
I was thinking of getting a set of 17x10 +18 offset all around for my evo 9....
would that fit?
what would i need to do:
1- roll the fenders yes/no?
yesssss
2- cut the fenders yes/no?
ummm not really just relocated the rear bumper/fender bolt
3- need spacers yes/no?
NOOOO
4- need wheel studs yes/no?
NO
5- need open lug nuts yes/no?
NO
and what kind of camber needed, personally i love -3 to -4.5 for autocross
FRONTs may need -3.2/-3.7 to rears dayum a LOT more!!!
Thanks guys
I was thinking of getting a set of 17x10 +18 offset all around for my evo 9....
would that fit?
what would i need to do:
1- roll the fenders yes/no?
yesssss
2- cut the fenders yes/no?
ummm not really just relocated the rear bumper/fender bolt
3- need spacers yes/no?
NOOOO
4- need wheel studs yes/no?
NO
5- need open lug nuts yes/no?
NO
and what kind of camber needed, personally i love -3 to -4.5 for autocross
FRONTs may need -3.2/-3.7 to rears dayum a LOT more!!!
Thanks guys
Thread
Thread Starter
Forum
Replies
Last Post
Fractur3
Project Cars / Build Threads
95
Sep 9, 2016 08:43 AM