New Stance & Kicks!!! (18x10 CCW C14, BC Coilovers)
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: Daytona Beach, FL
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
New Stance & Kicks!!! (18x10 CCW C14, BC Coilovers)
Just installed a set of BC Racing Coilovers & CCW C14's on my buddy Danny's (DannyIx) RS so we busted out the camera and took some photos. Nothing special we'll do another soon and get Dion (Evo Tengoku) out as well.
Suspension: BC Racing Coilovers (500lb springs front, standard springs rear)
Wheels: 18x10 CCW C14's (+33, stain black w/reflective white pin stripe)
Tires: 265/35/18 Bridgestone RE-01R
Hardware: 949 Racing Alumium Valve Stems & Lug Nuts
To run the same offset 10" wide wheels all around the rear fenders were rolled the rear fenders, modified the rear bumper connection (due to ride height), and switched the stock BC Coilover 400-415lb 8" longs springs out with 500lb 6" long springs (to gain wheel/tire clearance from the suspension). The car is setup with 2 degrees of camber all around and got the car corner balanced with a cross weight of 50.2% with stock sway bar endlinks.
Suspension: BC Racing Coilovers (500lb springs front, standard springs rear)
Wheels: 18x10 CCW C14's (+33, stain black w/reflective white pin stripe)
Tires: 265/35/18 Bridgestone RE-01R
Hardware: 949 Racing Alumium Valve Stems & Lug Nuts
To run the same offset 10" wide wheels all around the rear fenders were rolled the rear fenders, modified the rear bumper connection (due to ride height), and switched the stock BC Coilover 400-415lb 8" longs springs out with 500lb 6" long springs (to gain wheel/tire clearance from the suspension). The car is setup with 2 degrees of camber all around and got the car corner balanced with a cross weight of 50.2% with stock sway bar endlinks.
Last edited by ccdan; Nov 10, 2008 at 08:18 AM.
#2
Newbie
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: Daytona Beach, FL
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Adjusting The Ride Height, Camber, & Toe
Changing The Front Springs (8" Tall 400-415lb to 6" Tall 500lb)
Before & After Spring Change
Wheel Clearance (After 6" Spring Were Installed, Rear Trailing Arm Clearance)
Reflective White Stripe (sorry for the crappy pics)
Changing The Front Springs (8" Tall 400-415lb to 6" Tall 500lb)
Before & After Spring Change
Wheel Clearance (After 6" Spring Were Installed, Rear Trailing Arm Clearance)
Reflective White Stripe (sorry for the crappy pics)
Last edited by ccdan; Nov 10, 2008 at 08:17 AM.