johnnnyjeans

iTrader: (10)

just another question. I've been hearing that spacers hurt your wheel bearings. is that true?

marcusE

iTrader: (20)

Bump answer !

Sev

iTrader: (10)

Looks really good. The BBS's look so good.

NJ_evoIXgsr

iTrader: (15)

Giddity Giddity! bump

Anyone want to report if 15mm V2 hubcentrics work better for this? Anything to be aware of? Rubbing issues with 15mm?

Thank you for your time!

Evo_D

Bump! I to would like to know the answer to this. Also any rubbing issues with the 20mm spacers and 255's?

importmachine

iTrader: (4)

I have the 20mm on my car with 235/45/17 and they didn't rub at stock height. I lowered it on coilovers and it began rubbing in the front on the fender liner. I eventually got the fenders rolled.
On 255's they would definitely rub.

Evo_D

Ok we'll I'm on swift springs and now actually plan on getting 245's. rear fenders are already rolled. You think I'll still have some issues?

studioface

iTrader: (10)

^^ go 15 mm spacer and you should be fine with no rubs.

importmachine

iTrader: (4)

The rear's will be fine but I think you might still rub in the front. I see that you're in california. I would let you try my 20mm spacers on and see if it rubs so that way you can get an idea on what size to buy. 15mm would be a safer side IMO.

gabessdsp

Looks nice and flush

P.S. Sorry I didn't notice the last post date....

Eugenius

rubbing?

evo.matt

iTrader: (3)

old thread, but i had a similar setup but with 15mm spacers on stock bbs. Rear fenders rolled. I don't know what to tell you for the front, i removed the fender liners.