My apologies if I got the vernacular incorrect, I'm newer to retrofitting.

The overall size of the RL projector is bigger except where it matters. The side mounting points on the TSX lights where you can drill and mount are completely missing on the TL. There is almost literally no place to mount them, at least not for a novice.

I already have them boxed back up to go back. I initially ordered the TSX projectors from TRS, but they didn't have any that were in good shape so they sent me the RL lights.

The Morimoto projectors is what I'm talking about. The H1 kit or the D2S. I have read a lot of good things about these kits. I'm trying to install this on a non-hid Evo 9.

Again, thank you for any help.

 

Sorry Mods, I hate to bring up an old thread. But I'm about to do this same retrofit and I couldn't seem to find a good post with specific bolt size and length for the mounting of the tsx projector to the factory bracket. Wanted to see if any of our Evo brethren could help me out so I could get the right hardware before I head to the shop for work this week and take them out and start the project. Thanks again guys.