Brembo rebuild kit + diagram
#16
Evolved Member
iTrader: (66)
Originally Posted by machron1
Meh mine burned off at my second track day 2 years ago and I never put new ones on. I figure when the dirt gets up in there & makes them leak I'll just get new seals. My car has over 72,000 miles on it and I still don't need new seals...
#18
I posted this a while back.
https://www.evolutionm.net/forums/sh...brembo+rebuild
Still have a couple kits left, if those sell out I'll make up some more.
Thanks,
Martin
https://www.evolutionm.net/forums/sh...brembo+rebuild
Still have a couple kits left, if those sell out I'll make up some more.
Thanks,
Martin
#19
I hate to resurrect an old thread...but I do need info.
I tore a dust boot when cleaning up my calipers. The dust boots refuse to come out. Problem is....even to replace the piston seals for the calipers requires the dust boot to be destroyed. So, how in the hell do I get the dust boots out. I found no write ups so far.
BTW, I am making my own custom BBK with the use of these calipers so I dont know mitsubishi stuff too well. Info would be greatly appreciated.
I tore a dust boot when cleaning up my calipers. The dust boots refuse to come out. Problem is....even to replace the piston seals for the calipers requires the dust boot to be destroyed. So, how in the hell do I get the dust boots out. I found no write ups so far.
BTW, I am making my own custom BBK with the use of these calipers so I dont know mitsubishi stuff too well. Info would be greatly appreciated.
#20
Evolved Member
1. Boot in groove on piston
2. Boot in groove in piston bore
3. Insert piston lubricated with brake fluid in bore
Thread
Thread Starter
Forum
Replies
Last Post
blacktab420
Water / Methanol Injection / Nitrous Oxide
3
Feb 2, 2016 09:51 AM
EyeDreamt
Mitsubishi TC-SST Discussion
12
Sep 12, 2013 03:04 PM
ct78155
For Sale - Suspension / Brakes / Handling
7
Jan 12, 2012 04:46 PM
kstpeter33
Water / Methanol Injection / Nitrous Oxide
6
Dec 26, 2008 06:30 PM