409 HP @ CBRD with BBX
#1
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Jan 2009
Location: Waldorf, MD
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
409 HP @ CBRD with BBX
Finally got my car hooked up from the mad scientists at CBRD. They put a 3-port, thier new manifold (swain coated), injectors, and the BBX. I've driven it over the last two days and all I can say is WOW! It pulls incredibly hard all the way to where I had Chad set my rev limit at 7600. There is a little bit of lag, but all that power up near redline is well worth the sacrifice. Before when I drove it, I found myself shifting early because the car seemed to fall on it's face up top. Problem solved! Thanks again Chad and Mark for everything!
My numbers before were 347 hp 337 tq with boltons. Now I'm at 409 hp and 330 tq on 93 oct.
Here's the graph and a photo:
My numbers before were 347 hp 337 tq with boltons. Now I'm at 409 hp and 330 tq on 93 oct.
Here's the graph and a photo:
Last edited by geezevox; Apr 22, 2010 at 07:57 PM. Reason: Added 93 octane
Trending Topics
#13
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Jan 2009
Location: Waldorf, MD
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Guys for all the good words. As far as the lag, any big turbo is gonna have it. I am fine with this turbos lag. Power comes on smooth and steady and doesn't end.
I would guess you would be at the same power with their smaller turbo and cams, but may have to run more boost!
Mlomker, I know what u mean. The wait almost killed me!
Jay, thanks man. I'll be at work Monday. You gotta ride in this thing!!!
I would guess you would be at the same power with their smaller turbo and cams, but may have to run more boost!
Mlomker, I know what u mean. The wait almost killed me!
Jay, thanks man. I'll be at work Monday. You gotta ride in this thing!!!
#14
Account Disabled
iTrader: (60)
Smaller BBX
CBRD Manifold
CBRD IC pipes
CBRD FMIC
Perrin inlet pipe
AFE Intake
3 port, turboback (with 3 mufflers)
on our 19" wheels
Now, granted, my tune is more aggressive because its my car,
but im running 27.0 psi tapering to 25 and the smaller turbo is spooling 215rpm slower than stock
![Wink](https://www.evolutionm.net/forums/images/smilies/wink.gif)
With the BBX the car picks up about 25whp up top, so 420 range on stock cams...
CB
#15
Evolving Member
iTrader: (4)
Join Date: Feb 2008
Location: Fort Worth TX
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
those are pretty good numbers for its boost...nice.
i wonder how this will work around 30ish psi..hmmm..and did i read the graph right there Chad? 3.5k peak boost? good job CBRD!
![Smilie](https://www.evolutionm.net/forums/images/smilies/smile.gif)
![Big Grin](https://www.evolutionm.net/forums/images/smilies/biggrin.gif)
Last edited by tonyboy; Apr 23, 2010 at 07:02 AM.