Might be a year late, but

 

Got my package direct from Prosport. I picked up the Electrical 60mm Premium Amber/White guages that have the blacked-out faces when off, the start-up stepper mode, along with Peak warning that you can easily set. You can rig up the lighting however you like, but I made the decision to have them White when the marker/headlights are off and Amber when the marker/headlights are on.

Each gauge comes with instructions, stickers, senders pertaining to the gauge, a daisy chain harness, gauge pod and power wiring.

I picked up the following gauges in 60mm along with some other hardware.

-60mm Premium Boost
-60mm Premium Oil Temp
-60mm Premium Water Temp
-60mm Premium Oil Pressure
-Prosport Oil Filter Adaptor

I bought the Gruppe-S tripple gauge dash kit, the 42 draftdesigns water temp housing and the OEM radio relocation kit to make the install a little easier...

Overall the gauges are nasty looking and pretty simple to install... O0

 

great pictures, great set-up and everything looks awesome^^

 

thanks man...!

 

ill post mine up tonight i got mine from alltrackracing.com, and the dude there installed them for free as well, and they are hooked up to change colors with the headlights being off and on

 

I just got Premium Oil Pressure and Boost gauges, and am totally clueless as to how to put these any. Anyone have anywhere I can go for installation instructions?

 

You can email us directly for installation instructions. We have revised the instructions as well.

Sorry for the confusion. sales@prosportgauges.com

Have a good day everyone.

 

I got the Prosport wideband and premium boost (both in blue). I have had them in for a month and they work great. No problems at all...other than trying to figure out where to mount them in the X. Small concern...there is a slight rattling (boost gauge) at slow speeds when I hit small bumps. Other than that, great alternative to other more expesive brands.

 

the rattle is the button hitting the lens. You can GENTLY turn the bezel to make the button rest against the lens and that will make it so the button cannot rattle.

 

Might be answered somewhere in this thread, but on youtube all the videos I've seen they light up blue when started and then turn red?

I want some that are only red, and never go blue, is this possible?

 

Well, yes, Amber really. The blue light (peak) makes them appear on camera to be blue but they light up white and Amber on start up as part of the opening ceremony. No blue unless you have a blue gauge.

 

I get nothing but compliments on the guages...!

Thanks guys...!

 

Thank you for sending those pics to us. Glad your another happy customer and good job

 

I just had my water temp gauge fail on me 2 months ago, and now my oil pressure is starting to do the same thing. The startup routine is getting stuck, to where the gauges get stuck in doing the startup loop, and then they just peg to the maximum reading:-/

I bought them last year, installed in September. Not sure what the warranty is, but I'm wondering if anyone else is having these issues? These are the amber/white dial gauges. The Voltmeter is doing fine so far...

 

If the gauges are pegged out that indicates an open circuit...
That could be a wire came disconnected, bad ground, melted wire, etc..
Give us a call and we can help diagnose for you to get you fixed up.. 727-572-9011