Auxilary input help!!!
Thread Starter
Newbie
Joined: Mar 2011
Posts: 3
Likes: 0
From: Phoenix, AZ
Auxilary input help!!!
Hi guys,
I recently purchased the aux input unit from mitsu for my 08 Lancer Evo GSR nonSSS. I installed with the directions given, followed to a T. After the unit was installed into the back off my head unit, I reattached the negative to my battery. Now my stereo display would not even come on. So, I opened her back up and put everything back to original (without the aux input) and turned the car back on- still no display. I figured maybe I blew a fuse, but that is definitely not the case. Any ideas what could be wrong before I have to take it in to get ripped off by mitsu? Thanks in advanced.
I recently purchased the aux input unit from mitsu for my 08 Lancer Evo GSR nonSSS. I installed with the directions given, followed to a T. After the unit was installed into the back off my head unit, I reattached the negative to my battery. Now my stereo display would not even come on. So, I opened her back up and put everything back to original (without the aux input) and turned the car back on- still no display. I figured maybe I blew a fuse, but that is definitely not the case. Any ideas what could be wrong before I have to take it in to get ripped off by mitsu? Thanks in advanced.
Sounds like something might be messed up with the ribbon strip that connects the display to the wiring harness.
Check that it is properly plugged in where the ribbon connector attaches.
Good luck!
Check that it is properly plugged in where the ribbon connector attaches.
Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
him
Lancer Audio and Security (All models)
5
Oct 15, 2013 05:18 PM
WolvieDC
Evo X Electrical / Audio / Security
31
Jan 9, 2012 12:04 PM
osunick
Evo X Electrical / Audio / Security
4
Jan 5, 2012 02:21 PM
