Anyone know where I can tap the reverse signal so that I could make my backup camera work?

 

Just to try it out, it should work stretch a really long cable to the power wire to your reverse light tap that to your backup camera signal wire behind your radio.. Do it outsided the car just to double check that it works but that should do the trick

 

just tap into the rear reverse light

 

Do you have access to the wiring diagram?

 

+1 prob the easiest way to do it, and solder and heat shrink

 

Thanks for the suggestions. I found it. Its on one of those connectors thats on the radio harness. Its a white wire. I will take a picture of it.