Aftermarket double din with rf
#1
Aftermarket double din with rf
So I'm planning on getting an aftermarket double din non navi for my 14 gst with rf and I've been reading all the threads and I'm comfused. I plan on taking out the sub Because I don't really need it. What would I need to make it work properly? I also want to retain steering controls also.
Trending Topics
#9
Evolving Member
@Evox267 - Pulling the amp means that you would have to replace the radio, connect the harnesses that went to the amp, or run new speaker wire, and replace all speakers. you would then have to install an aftermarket amp to power the sub. a lot more work that just using an adapter harness
#10
@Evox267 - Pulling the amp means that you would have to replace the radio, connect the harnesses that went to the amp, or run new speaker wire, and replace all speakers. you would then have to install an aftermarket amp to power the sub. a lot more work that just using an adapter harness
#11
Evolving Member
I have been through 4 MITO 02 harnesses in the wifes 07 Eclipse GT with rockford.
Harnesses 1 & 2 just stopped working one day, the third one wouldn't communicate with the CAN bus, and the 4th one worked great the first week, but now also wont communicate with the can bus.
At this point im done changing harnesses, just saving $$ for a full system replacement.
I have heard some success stories with the MITO pieces, and this is just MY experience with them.