We have two boost solenoids one over another in EvoX.
Which of them is reactive and wich is passive?
Thanks.

 

Why do you need to know, as in what are you trying to accomplish? EcuFlash has them labeled as active (primary) and passive (secondary). EcuTek just calls them Primary and Secondary. Shop manual should show you which is which.

Are you wanting to put a bleed on the secondary or something?

 

The one closest to you is the reactive....

 

I'am using 3-port GM and EcuFlashed WGDC tables on my Evo8 now.
I want change reactive solenoid to 3-port GM + resistor and desaible passive solenoid on EvoX. But i can not understand which is which ).

 

ecuflash calls it reactive and not reactive on the X maps

 

That which above?

 

They named "solenoid 1" and "solenoid 2" at the manual. And they have the same part.number in the shop-manual.

 

Well crap thats no good then. You could always just unplug one (from the wiring harness) and see what code it throws, the code might tell you whichis which.

Then again if the manual calls them 1 and 2, I would assume 1 is reactive aka primary and 2 is passive aka secondary.

 

 

burnings
Thanks you.