Logging with the (Beta) Standalone Tactrix Cable Logger (No More Computer!)

Reply Subscribe

Thread Tools

Search this Thread

Oct 18, 2012 | 08:35 AM

#196

TravisF

Evolving Member

iTrader: (1)

Joined: May 2008

Posts: 239

Likes: 0

From: New Mexico

Quote:

Originally Posted by Windstorm

Can anyone tell me the address to log STFT on 2008 USDM GSR (52680022)?

(the one from the cfg files a few posts up results in no data)

TIA,

http://www.goldenevo.com/logx_view.php?ecu=3

Oct 18, 2012 | 06:32 PM

#197

Windstorm

Newbie

Joined: Jun 2009

Posts: 41

Likes: 0

From: Somewhere over the 9th floor

Thanks, found it! Below if anyone else is looking:

paramname=STFT
paramid=0x808898
scalingrpn=x,0.1953125,*,25,-

Oct 19, 2012 | 06:53 AM

#198

Live4Redline

Evolving Member

iTrader: (2)

Joined: Apr 2008

Posts: 381

Likes: 2

From: Richmond, VA

Quote:

Originally Posted by richardjh

No, it's just that you exceeded my maximum-questions-per-post-limit-before-my-brain-explodes... by eight.

Rich

Lol. What can i say, i like to come prepared and after reading 13 pages of back and forth posts... they rack up pretty quickly.

Thanks again guys, got this up and running like a charm. Its nice to be able to log track heats for review the next day. Not only from a performance and safety stand point but logged MPH is kind of nifty to review and go back on during the Go Pro Vids. Peak MPH in straights and average mph per run, now if only i could find a way to log G-Force off the ACD controller! =)

Oct 22, 2012 | 11:59 AM

#199

fostytou

EvoM Community Team

iTrader: (15)

Joined: Sep 2006

Posts: 3,143

Likes: 7

From: Aurora, IL

Quote:

Originally Posted by Live4Redline

now if only i could find a way to log G-Force off the ACD controller! =)

There is a way to for the CT9A. That probably requires a laptop and is for another section though.

Nov 28, 2012 | 07:24 PM

#200

acidtonic

Evolved Member

iTrader: (1)

Joined: Jun 2009

Posts: 746

Likes: 1

From: Detroit

I just picked up an OP2.0 for my 2012 X and I'm looking to log my Zeitronix ZT-3 through standalone input.

1. Has serial logging been implemented yet for this wideband on the mini jack?
2. If not, has anyone already done the work for scaling the Zeitronix Wideband for analog input by chance?

If not, I'll just log raw voltage on Pin 8 using a small OBD2 extension cable and scale it properly using the manual which specifies the scaling and post back.

Can't wait to get this working. I'm going to use standalone logging from the beginning on the X. I was so tired of the whole laptop in the car thing with the IX.

Thanks for your help guys

Nov 29, 2012 | 09:38 AM

#201

fostytou

EvoM Community Team

iTrader: (15)

Joined: Sep 2006

Posts: 3,143

Likes: 7

From: Aurora, IL

Quote:

Originally Posted by acidtonic

Thanks for your help guys

I think it should work for any serial data stream - should be no scaling required.

Dec 1, 2012 | 07:02 AM

#202

acidtonic

Evolved Member

iTrader: (1)

Joined: Jun 2009

Posts: 746

Likes: 1

From: Detroit

Quote:

Originally Posted by fostytou

I think it should work for any serial data stream - should be no scaling required.

It would be fantastic if that is the case. I thought the serial communication was proprietary to each manufacturer and not an open spec.

So the LC-1 would speak a different ASCII output than the Zeitronix unit if you were to capture the stream of communication.

I know the Analog input through pin-8 will work since voltage is voltage, but I'd rather not splice into any wires if I can just get a female RS-232 to male 2.5mm cable and hook it up.

Can anyone else confirm this with Zeitronix units?

Apr 27, 2013 | 06:16 PM

#203

Live4Redline

Evolving Member

iTrader: (2)

Joined: Apr 2008

Posts: 381

Likes: 2

From: Richmond, VA

Its been awhile but just wanted to note that this is still up and working great on my Evo 9. Every so often i take a look at the logs to make sure everything is still running great and its absolutely amazing for recording track info.

Someone was asking if I could post my CFG files up so here ya go.

EVO 9 FILE BELOW (with AEM Wideband connected via mini-jack and 1 Byte load)

Quote:

;
;
; LIVEREDLINE'S Evo 9 LOGCFG FILE v2.2
;
; must be named logcfg.txt and be placed in the root directory of the
; microSD card inserted in the openport in order to work

; this uses the MUT-II protocol over the K-line, which works
; for many mitsubishis, including the EVO 8 and 9

;----------------mut2----------------
type=mut2
;---------------------------------------

paramname=TPS
paramid=0x17
scalingrpn=x,0.39215686,*

paramname=RPM
paramid=0x21
scalingrpn=x,31.25,*

;paramname=2ByteRPM ;<-- Disabled in exchange for 1Byte Load
;paramid=0x808746
;databits=16
;scalingrpn=x,3.90625,*

paramname=TimingAdv
paramid=0x06
scalingrpn=x,20,-

paramname=Airflow
paramid=0x1A
scalingrpn=x,6.29,*

paramname=Speed
paramid=0x2F
scalingrpn=x,1.242742384,*
priority=2

;paramname=Gear ;<-- Works but Disabled
;paramid=0x80886e
;databits=16
;scalingrpn=x,22.6,/
;priority=2

paramname=MAP
paramid=0x38
scalingrpn=x,1.25,*

paramname=KnockSum
paramid=0x26

;paramname=AFRMAP ;Testing *FAILED (Does not work)
;paramid=0x8088f5
;scalingrpn=x,1881.6,/

;paramname=AFRMAPxTEST ;Testing *FAILED (Does not work)
;paramid=0x32
;scalingrpn=x,1881.6,/

;paramname=LoadCalc ;<-- Disabled in exchange for 1Byte Load
;scalingrpn=0

;paramname=ECULoad ;<-- Disabled in exchange for 1Byte Load
;paramid=0x1C
;scalingrpn=x,0.625,*

paramname=Load1Byte ;<-- WORKS
paramid=0x41
scalingrpn=x,1.2,*

;------BOOST CONTROLER STUFF------
paramname=ActiveWGDC
paramid=0x808b53
scalingrpn=x,0.5,*

paramname=BoostError
paramid=0x808B50
scalingrpn=x,128,-,2,/

paramname=WGDC_Correction
paramid=0x808b51
scalingrpn=x,0.5,*,64,-

paramname=PassiveWGDC
paramid=0x80a53f
scalingrpn=x,0.5,*

paramname=LoadFuel
paramid=0x80876E
databits=16
scalingrpn=x,.3125,*

;paramname=IATS ;<-- Works but Disabled
;paramid=0X808659
;scalingrpn=x,1.8,*,40,-
;---------------------------------

;---------FUEL TRIMS--------------
; ORGNINAL MATH =x,0.19607843,*,25,-
; EVOSCAN MATH =x,0.1953125,*,25,-

paramname=FuelTrim_Low
paramid=0x0C
scalingrpn=x,0.19607843,*,25,-
priority=2

paramname=FuelTrim_Middle
paramid=0x0D
scalingrpn=x,0.19607843,*,25,-
priority=2

paramname=FuelTrim_High
paramid=0x0E
scalingrpn=x,0.19607843,*,25,-

paramname=FuelTrim_InUse
paramid=0x50
scalingrpn=x,0.19607843,*,25,-
priority=2

paramname=O2Feedback_Trim
paramid=0x50
scalingrpn=x,0.19607843,*,25,-
priority=2
;---------------------------------

;-----------TRIGGERS------------

;----Only log when engine is running----

conditionrpn = RPM,0,>
action = start

conditionrpn = RPM,0,==
action = stop

;-----------WIDEBAND------------

;---AEM via OP2 Jack---
type=ascii
paramname=WidebandAF
paramid=1
;----------------------

----------EXTRA----------------
type=calc

paramname=LogEntryDate
scalingrpn=0

paramname=LogEntryTime
scalingrpn=0

paramname=LogNotes
scalingrpn=0

paramname=Custom
scalingrpn=0

Log file example...

May 4, 2013 | 12:50 PM

#204

Kakihara

Evolving Member

Joined: Sep 2008

Posts: 111

Likes: 2

From: Europe

thanky ou very much live4redline

I just bought a 2.0 and only stumbled on evoX threads since 2.0 users are mostly evoX, I drive a 9 with tephrav7

gonna take your logcfg as a base and then modify it a bit ,got a lc-1 and I will make a cfg mostly for virtual dyno runs maybe TPS >95% start TPS < 95% stop
will make a post in the 9 section when I'm done, thx again

May 4, 2013 | 01:13 PM

#205

Live4Redline

Evolving Member

iTrader: (2)

Joined: Apr 2008

Posts: 381

Likes: 2

From: Richmond, VA

Not a problem and any time boss. For best results limit the items you log to the bare minimum. A lot of the stuff i log i turn on and off for different results as you can see in the file.

Jul 31, 2013 | 04:42 PM

#206

TrailBrake

Evolving Member

Joined: Mar 2011

Posts: 269

Likes: 0

From: At the apex

If someone could kindly share a logcfg.txt file that works correctly 2013 RA it would be greatly appreciated, as I would like to validate everything is alright with the GST basemap V31.003 (stock pill: 93 octane) that I installed today.

Of the parameters I have tried, the following seem to be the most incorrect based on what I am seeing in the output file:

paramname=RPM (VALUE DOES NOT CHANGE FROM 722)
paramid=0x808794
databits=16
scalingrpn=x,3.90625,*

paramname=Knock (DISPLAYS EITHER 1, 8 or 16)
paramid=0x808A9B

paramname=Timing (VALUE DOES NOT CHANGE FROM -20)
paramid=0x808A57
scalingrpn=x,20,-

Any help would be greatly appreciated.

Thanks.

Jul 31, 2013 | 09:44 PM

#207

Live4Redline

Evolving Member

iTrader: (2)

Joined: Apr 2008

Posts: 381

Likes: 2

From: Richmond, VA

Quote:

Originally Posted by TrailBrake

Have you given these a try yet? Edit: Probably won't work for an Evo X, my bad.

paramname=RPM
paramid=0x21
scalingrpn=x,31.25,*

paramname=KnockSum
paramid=0x26

paramname=TimingAdv
paramid=0x06
scalingrpn=x,20,-

Last edited by Live4Redline; Aug 1, 2013 at 03:24 PM.

Aug 1, 2013 | 12:57 PM

#208

TrailBrake

Evolving Member

Joined: Mar 2011

Posts: 269

Likes: 0

From: At the apex

I will give those a try, thanks.

Any hints on collecting boost in PSI or manifold pressure in kPa?

Quote:

Originally Posted by Live4Redline

Have you given these a try yet? I think you'll have better luck if you do.

paramname=RPM
paramid=0x21
scalingrpn=x,31.25,*

paramname=KnockSum
paramid=0x26

paramname=TimingAdv
paramid=0x06
scalingrpn=x,20,-

Aug 1, 2013 | 02:31 PM

#209

Live4Redline

Evolving Member

iTrader: (2)

Joined: Apr 2008

Posts: 381

Likes: 2

From: Richmond, VA

Quote:

Originally Posted by TrailBrake

I will give those a try, thanks.

Any hints on collecting boost in PSI or manifold pressure in kPa?

Boost and Manifold pressure are the same thing. You also did not specify what MAP sensor so heres two options that i haven't tested but an educated guess says they should look something like this...

Edit: Again probably won't work for an Evo X.

JDM 3BAR Map Sensor (Pretty sure its the same as stock Evo X sensor)

Quote:

paramname=Boost (JDM 3BAR)
paramid=0x38
scalingrpn=x,0.19348,*,14.5,-

OMNI 4BAR Map Sensor

Quote:

paramname=Boost (OMNI 4BAR)
paramid=0x38
scalingrpn=x,0.2369,*,14.5,-

*Note that if you changed the above 14.5 in Evoscan to your local atmospheric pressure, you then will need to do that here as well.

Last edited by Live4Redline; Aug 1, 2013 at 03:24 PM.

Aug 1, 2013 | 03:22 PM

#210

Live4Redline

Evolving Member

iTrader: (2)

Joined: Apr 2008

Posts: 381

Likes: 2

From: Richmond, VA

Quote:

Originally Posted by Live4Redline

paramname=RPM
paramid=0x21
scalingrpn=x,31.25,*

paramname=KnockSum
paramid=0x26

paramname=TimingAdv
paramid=0x06
scalingrpn=x,20,-

paramname=Boost (JDM 3BAR)
paramid=0x38
scalingrpn=x,0.19348,*,14.5,-

paramname=Boost (OMNI 4BAR)
paramid=0x38
scalingrpn=x,0.2369,*,14.5,-

^ Should work on Evo IX.

But I forgot that the Evo X does it a little differently. May need to try this if you have an Evo X instead...

Quote:

Originally Posted by Live4Redline

paramname=RPM
paramid=0x808746
scalingrpn=x,31.25,*

paramname=KnockSum
paramid=0x808A4B

paramname=TimingAdv
paramid=0x808A07
scalingrpn=x,20,-

paramname=Boost (STOCK 3BAR)
paramid=0x80871A
scalingrpn=x,0.04824345,*,14.5,-
;*Note: I dont like these scalings but thats what was listed. If it doesnt read right maybe try the "x,0.19348,*,14.5,-"

paramname=Boost (OMNI 4BAR)
paramid=0x80871A
scalingrpn=x,0.058575,*,14.2,-
;*Note: I dont like these scalings but thats what was listed. If it doesnt read right maybe try the "x,0.2369,*,14.5,- "

Last edited by Live4Redline; Aug 1, 2013 at 03:25 PM.

Reply Share

First
Prev
14 / 16
Next
Last