Logging with the (Beta) Standalone Tactrix Cable Logger (No More Computer!)
I'm thinking all the request I've seen ecu based are 2digits or 5 like the evo x (I think its 5 can't remeber off hand) maybe the 100 set are "read from cable" worth a shot though. I appologize for pming that and not posting it publicly first . Thnx for putting it up . Pain in the *** from a phonne I can barely use lol
Evolved Member
Joined: May 2009
Posts: 522
Likes: 2
From: mnt vernon ny
ok i tested it free air using request 101 and 101 equations x, x*14.7 and x/14.7 non of them came close ... they were stagnant ... i was at lease looking for a lc1 lean output on the evoscan but nothing.i guess it isnt so simple haha. if anyone can chime in please help im not software savy . i also tried logging the comport that the 2.0 is connected to and still no luck. stagnant 0 as the out put.
Evolving Member
Joined: Feb 2009
Posts: 340
Likes: 2
From: Australia
was reading the other forum, should have checked here first!
can someone confirm the latest firmware numbers for me :
I'm on API version 04.04 , DLL version 1.00.3017 (Apr 8 2010) , Firmware version 1.10.3020
EDIT - that's on ECUFlash 1.43.3000
when i plug in the Tactrix to the laptop and go to ECUFlash licensing, and hit the "apply" button, thats what it spits out at me.
do i need to put something in the "Add License" window first?
Evolving Member
Joined: Feb 2009
Posts: 340
Likes: 2
From: Australia
LC1 logging via stereo jack to OP2.0... i get nada
i think i have this right
*************
type=inno
paramname = LC1.afr
paramid = 0x0101
scalingrpn = x,14.7,*
***************************
if that's right, maybe i need to look at my stereo cable?
i think i have this right
*************
type=inno
paramname = LC1.afr
paramid = 0x0101
scalingrpn = x,14.7,*
***************************
if that's right, maybe i need to look at my stereo cable?
Evolving Member
Joined: Feb 2009
Posts: 340
Likes: 2
From: Australia
yeah i was going to wire it in when i installed it, but bailed out thinking "I'll only ever use serial and a laptop".
:facepalm:
Laptop isn't much help on the track, it's kind of a large projectile
I'll fork out the few $$ to get a new cable and see how i go. The one i have is pretty beaten up.
:facepalm:
Laptop isn't much help on the track, it's kind of a large projectile
I'll fork out the few $$ to get a new cable and see how i go. The one i have is pretty beaten up.
I solved my problem, and probably yours. The section for logging AFR needs to be before the start/stop parameters. Once I moved it above those everything for my UEGO worked great!
Here is my Solid, working evo X mode23 logcfg with various start/stop options and extra logging parameters including AEM serial
http://thefrost.net/randomfiles/tuni...214.logcfg.txt
I tried to keep the shortnames in-line with evoscan as to keep it easy to pull up there. I'm interested to see how these long logs pan out when I AWK my way through them!
http://thefrost.net/randomfiles/tuni...214.logcfg.txt
I tried to keep the shortnames in-line with evoscan as to keep it easy to pull up there. I'm interested to see how these long logs pan out when I AWK my way through them!
