Just a noob looking for help


I have the following -

2010 GSR X
Rom ID: 55570005
Mode 23 Enabled
Lean Spool Off
Evoscan 2.7 Beta 5
-------------------------------

I have attached a video via YouTube with the problem I am having. It seems that some parameters for my car are not working..

The drop down menu ("Select ECU") has a few options. The only option I can get to read my knock correctly is the "EVO X" option. Only problem, I can't seem to get the TPS to function properly, nor read my MAP in psi correctly.

When choosing "Mode 23 USA EVOX" a lot of the parameter readings are screwed up. 32 counts of knock at idle, 105+fluctuation on accel pedal pos.. etc.

Guess a couple of my addresses are wrong? Any help is appreciated. Thanks in advance.

http://www.youtube.com/watch?v=g7UhrUzMdVc

 

use the "Mode 23 2010 USA EVOXRA" for the 55570005..that's what i use..all is accurate except for the TPS

100% wot = 87% in evoscan (at least from what i know because in ztx logger it's 100%)

also there are still a lot of table definitions missing for our rom id..

 

Thanks. I posted this on the other evo x forum in my sig. I think ill get things working by tonight.

 

you need to check the mode 23 on your rom.It does that on the knock count when it is not enabled correctly. here is the link
https://www.evolutionm.net/forums/ev...lustrated.html
Maybe it is not enabled correctly

 

nah he just needs to use the right evox type in evoscan

 

Everything worked out fine. It was just a couple addresses that were incorrect.

 

i still use the beta logger Tephra wrote o.O