Hi All,

So the regular SPEED (MUT2F) is a bit slow to update.

If you use MUT2E and divide by 4 that should give you a much smoother update interval...

When I get a chance I will post up a graphy graph

Cheers
D.

 

mine tops out at 63.5
evoscan and standalone

that's using x/4 or (x,0.25,*)

 

anyone else tried this yet??

 

no, bu.t maybe its a 2-byte and you are only seeing the first 8 bits

 

probably seeing the least significant bits/byte... try changing "ResponseBytes" to 2 in EvoScan and see if that fixes it.

 

good thought, I'll give that a go

 

the low byte of a 2-byte value will roll over to zero each time the high byte increments.