MAF Sensor Calibration helper app.
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: SoCal
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
MAF Sensor Calibration helper app.
Hi,
Just want to share with the community an app I wrote to help with MAF cal.
The app will do all the tedious work for you and give you numbers to use.
http://www.tunerstools.com/mafcal.php
Hope this help out...
If there's any problems, please post here.
Currently Evoscan and AP logs are supported. If other logs don't work, post here so I can add the support for it.
If you have suggestions for improvement of this one or would like to see new apps, let me know.
Just want to share with the community an app I wrote to help with MAF cal.
The app will do all the tedious work for you and give you numbers to use.
http://www.tunerstools.com/mafcal.php
Hope this help out...
If there's any problems, please post here.
Currently Evoscan and AP logs are supported. If other logs don't work, post here so I can add the support for it.
If you have suggestions for improvement of this one or would like to see new apps, let me know.
Last edited by azevox; Jan 11, 2012 at 02:40 PM. Reason: more log support
#4
EvoM Community Team
iTrader: (15)
Just an FYI if you are using standalone logging these are the 3 items you need to log ('08 USDM)
I'm going to try this and eliminate where (TPS < 13% and RPM > 1500). This should keep idle then, although I think STFT might go to 0 when in decel... I just gotta look at the log later and see. I'll also eliminate the cold coolant temps (as instructed).
paramname=MAF_Volts
paramid=0x808F50
databits=16
scalingrpn=x,1024,/,5,*
paramname=LTFT_Current
paramid=0x808C1F
scalingrpn=x,0.1953125,*,25,-
sampgroup=50
paramname=STFT
paramid=0x808898
scalingrpn=x,0.1953125,*,25,-
sampgroup=1
paramid=0x808F50
databits=16
scalingrpn=x,1024,/,5,*
paramname=LTFT_Current
paramid=0x808C1F
scalingrpn=x,0.1953125,*,25,-
sampgroup=50
paramname=STFT
paramid=0x808898
scalingrpn=x,0.1953125,*,25,-
sampgroup=1
Thread
Thread Starter
Forum
Replies
Last Post
pr0phet
Site Feedback / Suggestions
8
Jul 29, 2015 11:30 PM
35, 60, app, calibration, calibrator, compatible, evo, evolutionm, helper, maf, mafcal, problem, sensor, sensore, tuning