i'm curious as to what fellow owners have for aftermarket wastegates, their properties, and adjustments. so, if you have a minute, could you please sound off on:

brand of actuator
spring resistance
preload you have set
taper (and @ what rpm if possible)
and max boost

oh, if you have an aftermarket boost controller, please post that as well!

thank you very much

 

Forge WGA
Red Spring
About 1.5 turns from 0 on the thread.
Tapers to 19.5-20PSI
Spike 25.5-26PSI
ECU Control COBB+SF STG.1 93 OCT

 

HKS WGA
About 3-4 Turns
Tapers to 21 psi
Not much spike, holds at 23ish during torque curve
Custom Pro-tune 93Octane - Basic Stage II mods.

 

JUN WGA
around 2-3 turns
Tapers to 20psi
Max boost 26psi
No EBC, Cobb AP tuned.