Bump for any updates.

 

It's there, look at the cat end of the pipe. X's 02 sensor is at the cat end of the down pipe.


I was really just bumping this for updates and to add that I think you guys should make this a two piece affair, even if it does not split at the stock location that is a tight working area and you really need to be able to pull the turbo with the 02 housing intack, not sure you would be able to do this with the 1 piece design.

Looks real good though

 

Here's one by G-Force Japan, it's a two piece with a slip on joint and flex pipe. They didn't want to use a flange so they can use larger diameter piping (the flange is really close to the steering column on the JDM).

 

Bump for any info on an upgraded O2 Housing or O2 Housing Downpipe combo. What would be involved with installing either one, would the turbo have to be removed or is it just a matter of a few heat shields from the engine bay working from the top?