Hey guys,

The aeromotive 340l/ph fuel pump is a mirror image of the walbro 255l/ph. What that means is the pulls (+/-) are reversed. If you're going to install this you will need to swap the pins on the fuel pump jumper harness so it goes to the wiring harness in the proper polarity.



Installation pics:









Dimitri@Akuma
Marketing/sales Executive
Dimitri@Akumamotorsports.com

 

After speaking with them, an addendum to the instruction manual will now be added. The mold is set, so the pump will stay that way.

John

 

Wow. Good to know

 

Thast some good info, bump for more to read.

 

Nice find. You probably saved someone a lot of pain.

 

Thanks guys! After we saw this we immediately put it up to save everyone else a headache! We'll keep an eye out if we see any other issues.

Dimitri@Akuma

 

Thanks a bunch!

 

Just found this out today as well when installing an intank kit for a 92 acura integra turbo build.

 

Nice tut man! Benefited to read

 

Thanks for this info. Which install tank kit are you using?

 

i just got a aeromotive 340 and it looks like they have fixed the mold as it is identical to my Walbro

 

They are idiots for copying the basic design of the Walbro and then reversing the wires. You do not have to reverse them on all EVO's either....

 

got this pump about 2 weeks ago identical to the Walbro

 

Great catch.

 

Do you have to drill the housing? For e85?