I have an evo ix on stance coilovers. I lowered it and got some stock enkei evo x rims. I had 25mm spacers but they rub in the front and won't fit in the back unless u roll the fenders. Any suggestions on a 15mm or 20mm spacer/tire size combo??

 

I'm running 25mm ichiba spacers all around on the stock GSR wheels and it's perfect, does not extend passed the body, it's nice and level.

 

I am running Swift Sport Springs with 15mm H&R TRAK+ spacers. The 15mm spacer pushes the wheels out just enough. It is slightly less than flush, which looks good in my opinion. I highly recommend the H&R spacers. Very good quality.

Here are some photos:

 

Mines the GG 25mm ichiba v2's on tein springs

 

The wider the meaner.

 

with 25mm spacer do you need to extend your lugs??

 

All these are Bolt on spacers.. Meaning they come with Studs built into the spacer. They bolt on to your Stock Studs with special lugs

 

what is the lug pattern for the gsr?

 

all 8/9/10's are 5x114.3

if you're looking for the lug nut thread it's 12x1.5

 

FML it's the same fkn lug pattern as the GD STI?! I just sold a set of 20mm spacers that I took off of the car before trading it in. I sold the Project Kics lug nuts because the were only 1.25 because I knew that measurement.

 

Chill. Subarus have a different centerbore.