theblackbeast11

iTrader: (1)

SO i went to the track a couple weeks ago with a slipping clutch but went anyway only because i had all the parts for clutch sitting in bed room waiting to be installed.

Parts are
Exedy triple disc, new oem tob, map cmc and redline cocktail fluid just sitting there waiting.

So a little story behind the clutch
I just got the last part i needed in the very next day the clutch starts to slip a little. Then track day came up Im like oh crap i have to go, so went to track slipping clutch and all.
FIrst run just rolled out to see what the car would do ended up running a 14.09 at 110.95 0-60ft was 3.15 haha

I was pretty suprised at the MPH so i ran again and did a little launch like 4k ended up running a 12.69 at 112.50 0-60ft was 2.18

So last chance of the day one more run going ***** out full launch and all I knew the clutch was going to slip but just did it to see. I was next to a new 5.0 mustang so i had to do what i could to beat him. so I launched it hard clutch slipped bad let off caught and then got back into it ended up running a 12.63 at 112.84 0-60 was 2.03 and yes i beat the mustang haha he ran a 12.7 at 113.07 0-60 was 2.10 It was a fun race so worth it....


Now trip home this track is 2 hours away from my house so 2 hours there and 2 hours back.
On the way home clutch was slipping and by time i got home had to hit 7500 rpm to get it to move so clutch is toasted now.... SO into the shop she went got a exedy triple disc installed with map cmc and front motor mount and left and right motor mount inserts installed...

New 1/4mile time to come have not had a chance to hit the track again since new clutch i got 150 miles on the new clutch....

Can not wait to hit the track again..... TO BE CONTINUED !!!!!!!

Cbus

iTrader: (1)

how you liking the MAP CMC?
Just got mine delivered yesterday. Probably put it in soon.

theblackbeast11

iTrader: (1)

It is not bad i got it so cheap i could not pass it up i got the cmc and was able to but solid rear end mounts haha. Only thing i wish it had was the holders to put in stock location but its great works great well worth it

evokid4life

iTrader: (2)

at 110 you should of mad a low 12 sec pass with a good clutch and launch

theblackbeast11

iTrader: (1)

yup i did not launch on that one just rolled out thats why time was 14.
And the other ones never got clutch to hold for a launch 0-60 times suck haha i can not wait to get back with the new mods i think im adding rpf1 wheels to the mix with dunlop z11 tires and debating on buying the ams/ willwood brake kit as well if i do all that better be 11.9 haha

Cbus

iTrader: (1)

Oh you didn't get the bracket that the cmc goes into?