Car won't start after replacing all possible parts
#1
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Aug 2006
Location: WA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Car won't start after replacing all possible parts
I have a 08 evo x with built engine. One day the car just die on the highway, it won't start. I got it tow to the shop, when the car arrived to the shop, it starts again. First thing it came to mind must be the fuel pump. But I replace the fuel relay first, which it doesn't work. I order an arm fuel pump which is what I'm currently running. It still won't start, the spark plug got oil bathed, so I replaced them as well. I check the oil line to the engine to see if there was any gas oil going into the engine, which was fine. I then replace the crank position sensor, the car finally runs. But 2 days later, the car won't start again. WTF, anyone know why?
#5
EvoM Guru
iTrader: (1)
Originally Posted by jsdude
Compression test and leak down won't effect the starting. Two reason that will affect starting of a car, ignition and fuel. I replace all of them, that's why I stuck.
Trending Topics
#9
EvoM Community Team Leader
sounds like you need to replace the operator.
for real though, you need to upgrade your humility module if your going to be asking for help on the interwebs.
for real though, you need to upgrade your humility module if your going to be asking for help on the interwebs.
#10
You need four things to get an engine started/running. Fuel, Spark, Compression and good timing. If any one of these is off, then you'll have issues. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Kyle R
General Engine Management / Tuning Forum
1
Jun 11, 2007 11:55 AM
Z_Lancer_Man
Lancer Troubleshooting
12
Jul 13, 2004 01:32 PM