ETS intake install help needed
ETS intake install help needed
does anyone have an install for the ETS intake? I've seen one for the AMS but it's a little different. I know how to connect the inlet pipe to the turbo, the maf adapter and filter to the inlet pipe, and the inlet pipe to the bov, but there's also 2 other ports on the intake and i'm not sure what goes where. There is also a long rubber piece that im not sure where it goes either lol im assuming somewhere around the maf adapter and filter?. Help help help please!! thanks to all in advance!
Evolving Member
Joined: Dec 2008
Posts: 112
Likes: 0
From: Richmond, va
The two outlets on the back of the pipe are the same as the stock connections. Did you get the extra bung when you bought the intake? The thicker tube pops down inside the the hole with the grommet in it. The other connects to the vacuum line that came off the stock intake suction pipe, ill take a picture for you if I get a chance.
Newbie
Joined: Jul 2010
Posts: 58
Likes: 0
From: San Antonio, TX
You know that little rubber hose that connects to the BOV? Well since ETS has moved the placement of the BOV you require a longer hose. The one ETS sent replaces the shorter one so it's a direct replacement.
Last edited by stEVOrgiX; Feb 15, 2011 at 09:17 AM.
Trending Topics
Newbie
Joined: Jul 2010
Posts: 58
Likes: 0
From: San Antonio, TX
If you're going to keep it stock don't need it. If you're going to mod your car you'll need it for a wideband o2 sensor. It's highly recommended if you're going to mod your car otherwise you really don't need it.
