I found the following link very helpful and informative for installing the Whiteline Roll Center Kit

https://www.evolutionm.net/forums/ev...hop-press.html

 

I think if you don't have the tools already. It's much better to just have a shop press them out. It will take them 20-30 min with a press, if you can take the control arm off yourself. Pay them 30 bucks and call it a day.

Instead of fiddling around for 4-5 hours trying to get them out, waste time to get tools, etc...

 

I had an arbor press, and I purchased the same kit that he used but in my local parts store had it labeled as a '4wd Service Kit'

It took me less then an hour to install the Whitelines on the driverside. The passenger side was my learning experience.