I think you're reading the chart incorrectly.

 

I have a evo x with the mr suspension (bilstein/eibach) and was looking at getting a set of weds sport SA-55M's 18x9.0 +20 and Im planning on going with 255's. Will this setup clear everything?

 

Clear yes. Poke outside the fender? Maybe?

 

Ok just wondering witch off set would be better to run! Would like to run a 265/35/18 just not sure witch offset would be better? I looking at Enkei PF07 18x9.5 have the choices of +15, +25, +40? Would like not to adjust camber and not to roll the finders.

This are the wheels
http://www.vividracing.com/catalog/g...=201&sizey=169

Tires
http://cdn-ak.f.st-hatena.com/images...1210195713.jpg

 

I'm running this exact setup on my MR. No springs or coils (yet). The fitment is perfect; no issues whatsoever. The setup is almost square with the fenders.

 

Thanks! The wheels should be in very soon so I'm relieved to hear I won't need to roll the fenders!

 

hi guys

planning on running 18x10.5 +22 with 265/35/18 rubber

oem struts lowered on HnR springs

rear guards have been rolled.

will there be any clearance or rubbing issues i should expect??

TIA

 

I need some help. So I already have a wheel from my previous vehicle but it is a 5x100 bolt pattern. I was thinking of just buying wheel adapters but the smallest adapter I can find is 25mm. The wheel specs are 18x9.5 ET38 and the tires that are mounted are 235/40 18. If I were to run this wheel with the adapter on the Evo X, will it poke out too much or will it be flush with the fender? How does the math work on this? Do I subtract 25mm from ET38? Thanks for the input.

 

I've seen wheel fitment spreadsheet calculators on other forums. Is there one available for the Evo X?

 

Not sure if trolling. Scroll up and look at the top of the page in the notices section.

 

Can you put 10.5+15 on stock suspension and get enough camber to make them fit.

 

I picked up a set of 57Xtremes in 19X9.5 +25. My Evo is lowered on H&R's so about 1.3". I have -2* camber in the front and -1.1* in the rear.

I want to wrap them in Michelin PSS tires. 275/30/19 show a diameter of 25.6 that matches stock. With my current setup can I get them to fit ok or should I step to the 265/30/19's to avoid rubbing.

 

I have mixed thoughts of the offset to run on my car, I just want people opinions.

I'm about to pull the trigger on some te37 18x10.5 but what offset would be better +15 or +22? I'd like to run Toyo R888 in 285/30 aswell

 

+22 for sure. 10.5 +15 pokes a decent amount. I don't like the look.

 

Hello, Anyone know if

VarrsToen MK8
F/R: 18x10 +25 5x114.3

Will fit on Evo X Fe ?