Notices
EvoM New Member / FAQs / EvoM Rules New member? Come on in, introduce yourself, and get acquainted with the evolutionm.net posse :) FAQs will also be answered in here.

P0132 code

Thread Tools
 
Search this Thread
 
Old Jan 18, 2011 | 04:47 PM
  #1  
shrty10135's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Apr 2010
Posts: 136
Likes: 0
From: MD
P0132 code

ok so it seems like every-time it rains this code comes up and it comes up as P0132, front heated oxygen sensor circuit high voltage. But it goes away itself and i do have a new front o2 sensor but never installed bc it fixes itself, what should i do? or check.
Reply
Old Mar 10, 2012 | 10:33 PM
  #2  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Have you fix this? Mine does same, only when if i park outside in rain (heavy) for while.
- car try stalls when it starts up. Its goes normal after give little bit of gas
- no lose power or any problem driving.
Reply
Old Mar 17, 2012 | 05:31 PM
  #3  
sgsoldier's Avatar
Newbie
 
Joined: May 2010
Posts: 6
Likes: 0
From: el paso
check the wires going to the o2 sensor to make sure theres none loose or exposed
Reply
Old Mar 17, 2012 | 06:42 PM
  #4  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Sensor is fine.
Reply
Old Mar 18, 2012 | 07:47 AM
  #5  
sgsoldier's Avatar
Newbie
 
Joined: May 2010
Posts: 6
Likes: 0
From: el paso
yea but the wires might be exposed some where causing a short when it rains
Reply
Old May 10, 2012 | 01:37 PM
  #6  
Ian0611's Avatar
Evolved Member
iTrader: (41)
 
Joined: Feb 2010
Posts: 1,049
Likes: 5
From: IL
I had this happen to me today after I took my car through an automatic car wash. Car started running really lean at idle. I let it idle for a few minutes and seem to be OK but my AFRs were still acting a little goofy. I drove about 15 minutes and everything seemed OK and then after I parked and started the car back up again, the lean idle came back and I got the P0132 code. I cleared the code and drove to work and everything seemed OK for the most part but the front O2 seems to be responding slower than normal.

Can anyone confirm that exposed wires is the issue or do you think it's time for new sensor?
Reply
Old Jul 26, 2012 | 01:31 AM
  #7  
connor4200's Avatar
Newbie
 
Joined: Feb 2012
Posts: 52
Likes: 0
From: louisiana
same thing happening to me im gunna put a new o2 in and ill post what happens
Reply
Old Jul 26, 2012 | 06:36 AM
  #8  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Imma go ahead update mine. I had perrin foam filter, replaced with dry filter from stm. I also put back the plug cover...problem is gone, no more cel and no more acting weird.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
reyrey
Evo Engine / Turbo / Drivetrain
4
Mar 5, 2014 04:36 PM
kambodianboi
Evo General
1
May 10, 2013 08:34 AM
asu11
Evo General
1
May 18, 2012 07:04 PM
lookmanohands
09+ Ralliart Engine/Turbo/Drivetrain
8
Sep 21, 2011 11:50 PM
silver turbo
Evo X General
4
May 3, 2011 10:50 PM




All times are GMT -7. The time now is 09:54 PM.