My First Car!
My First Car!
Hey Guys!
My First Car, 02' Lancer OZ. Not Bad For a first. BUT Not Much Power to This Car!
So I was thinking about getting some Headers... Anything else I should get?
I'm Not Real Good at knowing what Products are good or bad and which ones to buy. So If you have the time can you hook me up with some Products that I can buy?
Thanks! PS I'm 16 So keep it under $600
Thanks Again!
-Andy!
My First Car, 02' Lancer OZ. Not Bad For a first. BUT Not Much Power to This Car!
So I was thinking about getting some Headers... Anything else I should get?
I'm Not Real Good at knowing what Products are good or bad and which ones to buy. So If you have the time can you hook me up with some Products that I can buy?
Thanks! PS I'm 16 So keep it under $600
Thanks Again! -Andy!
Hey Guys!
My First Car, 02' Lancer OZ. Not Bad For a first. BUT Not Much Power to This Car!
So I was thinking about getting some Headers... Anything else I should get?
I'm Not Real Good at knowing what Products are good or bad and which ones to buy. So If you have the time can you hook me up with some Products that I can buy?
Thanks! PS I'm 16 So keep it under $600
Thanks Again!
-Andy!
My First Car, 02' Lancer OZ. Not Bad For a first. BUT Not Much Power to This Car!
So I was thinking about getting some Headers... Anything else I should get?
I'm Not Real Good at knowing what Products are good or bad and which ones to buy. So If you have the time can you hook me up with some Products that I can buy?
Thanks! PS I'm 16 So keep it under $600
Thanks Again! -Andy!

you wont gain much power from this car unless you go turbo
its the sad reality
but your 16 and this is your first car
first off ill start by saying
DRIVE SAFELY!
dont go off thinking its a race car lol
depending on if its an auto or manual you should start with an air intake(only short ram for auto/cold air or short ram for manual)
so you can get a bit better gas mileage and a nicer sound lol
you can get a custom exhaust from a local shop in your area for cheap
shop around. make sure its with 2.25 if im remembering correctly
if you dont know RESEARCH
search bar is very helpful
and there is a show n shine section for our cars you can search there to and well
people here are also very helpful
just try not to ask simple question with out searching or....youl be in for it..

and welcome to the lancer family!
Last edited by sikksixx; Dec 21, 2011 at 06:59 PM.
Yeah I been a safe driver and always will. Yeah I been talking to other members they been saying Get a Turbo. I put money down for a Short Ram Intake already. Thinking about putting headers in. But What would a custom Exhaust system do? There is No Shops in Chicago That I know about. So Online would be the best bet for buying parts.
Thanks for everything,
-Andy!
Thanks for everything,
-Andy!
like you can buy it online but usualy it costs a bit more
custom just means the guy will do it the way u want it to be kinda lol
usualy ends up being cheaper including install you can seach
people go with 2.25 that have n/a lancers usually
but then again alot dont. lol depends
you probly will lose some low end torque if you go to a 3 inch.
you can read alot in our FAQ threads about it.
custom just means the guy will do it the way u want it to be kinda lol
usualy ends up being cheaper including install you can seach
people go with 2.25 that have n/a lancers usually
but then again alot dont. lol depends
you probly will lose some low end torque if you go to a 3 inch.
you can read alot in our FAQ threads about it.
Last edited by sikksixx; Dec 21, 2011 at 07:36 PM.
like you can buy it online but usualy it costs a bit more
custom just means the guy will do it the way u want it to be kinda lol
usualy ends up being cheaper including install you can seach
people go with 2.25 that have n/a lancers usually
but then again alot dont. lol depends
you probly will lose some low end torque if you go to a 3 inch.
you can read alot in our FAQ threads about it.
custom just means the guy will do it the way u want it to be kinda lol
usualy ends up being cheaper including install you can seach
people go with 2.25 that have n/a lancers usually
but then again alot dont. lol depends
you probly will lose some low end torque if you go to a 3 inch.
you can read alot in our FAQ threads about it.
Thanks,
-Andy!
Thread
Thread Starter
Forum
Replies
Last Post
use2vtec
Evo Engine / Turbo / Drivetrain
72
Mar 3, 2006 01:54 PM




