Anyone know how to reset the SES Light. I installed a TurboXS RFL BOV and the light came on.

Thanks

 

disconnect negative terminal on battery for 5 minutes. reconnect. clock will read 1:00 and CD will eject if inserted.

Please use the search feautre, it is your friend

 

Uh oh. What did you do to set the light off?

You need to determine what caused the light. Otherwise, it will come back after you reset it.

Here's how you do it. Remember to let the car idle:
http://g6civcx.napalm.net/tech/resetcpu.htm

Ignore the fuse method because it doesn't apply to the Evo.

And this thread is about to be moved. You posted in the wrong forum.

 

I have no idea what I did. I just installed the BOV and drove the car I would say, 5 hours or so with ZERO problems and it came on. The car still runs fine but it seems the turbo spools slower now. I am not sure if the aformentioned problems are common with VTA BOV on the EVO but it is PISSING ME OFF! I will probably be sending it back if I can't make it work. That really sucks because when it works, It sounds Awesome.

By the way, does the top screw off to allow shims to be added?

Thanks

 

Yes you need to add shims I added 5 of them. This is most likely the reason you are having a problem. Your valve is open at idle so the valve bleeds of pressure. Don't sent the valve back just fix it.

Ben

 

Moving to FAQ's Forum.