Evo 9 + ETS PT6262 turbo kit
#61
Evolving Member
Join Date: Jun 2005
Location: McKinney TX
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
#65
Evolving Member
iTrader: (28)
Join Date: Mar 2007
Location: easton, pa
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
my car is the one pete tuned. the supporting mods to the e.t.s 6262 unequal length manifold kit are as followed
buschur intake
aps twin vent bov
3" test pipe with magna flow 3" cat back
comp 272 cams
ams intercooler with upper pipe
880 injectors
as pete stated this trubo would perform much better with race gas. it wants boost for sure. i ran at the shoot out in englishtown today but pete is still working out the kinks on the two step. still kinda trying to find the sweet spot of where this turbo likes to be. on pump gas 25 to 26 psi seems to be best. this car has 81,000 miles on it and has seen boost daily for years.
buschur intake
aps twin vent bov
3" test pipe with magna flow 3" cat back
comp 272 cams
ams intercooler with upper pipe
880 injectors
as pete stated this trubo would perform much better with race gas. it wants boost for sure. i ran at the shoot out in englishtown today but pete is still working out the kinks on the two step. still kinda trying to find the sweet spot of where this turbo likes to be. on pump gas 25 to 26 psi seems to be best. this car has 81,000 miles on it and has seen boost daily for years.
#68
Evolving Member
iTrader: (28)
Join Date: Mar 2007
Location: easton, pa
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
well the spool actually isnt to bad. im not sure what it is compared to as far as the equal length but im at full spool by 4800 rpms. im launching at 6500 right now but the load and boost is what helps the car come off the line. see pete im learning something from you lol. pete can chime in but he is still working on the perfect consistent combo. he is very close though.
#70
Evolved Member
iTrader: (75)
Join Date: Jul 2007
Location: NorCal
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
well the spool actually isnt to bad. im not sure what it is compared to as far as the equal length but im at full spool by 4800 rpms. im launching at 6500 right now but the load and boost is what helps the car come off the line. see pete im learning something from you lol. pete can chime in but he is still working on the perfect consistent combo. he is very close though.
#74
No I am talking about the trans.
Make sure you are both talking about the same gear when comparing spool.
If yours spools at 4800 in 3rd, then compare his in 3rd as well.
You can't compare your 3rd and his 4th. The turbo will spool quicker the higher the gear.
Make sure you are both talking about the same gear when comparing spool.
If yours spools at 4800 in 3rd, then compare his in 3rd as well.
You can't compare your 3rd and his 4th. The turbo will spool quicker the higher the gear.