ETS can do it all Turbo Quad
Thread Starter
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest
I personally need to thank the following-
ETS for the turbo kit
Lucas for the swing arm and axle
TJ for letting me borrow his rear brake and front shocks
Kevin for 90% of the actual labor
Jake for the custom tweaks and battery relocate
Paul for the Ti front end and steering
Everyone that was there to help for the 2.5 days of 18 hours a day to get it done and ready to race
ETS for the turbo kit
Lucas for the swing arm and axle
TJ for letting me borrow his rear brake and front shocks
Kevin for 90% of the actual labor
Jake for the custom tweaks and battery relocate
Paul for the Ti front end and steering
Everyone that was there to help for the 2.5 days of 18 hours a day to get it done and ready to race
That is a truly sick setup, but now I want to see you install an Autronic SM4 and a 500R with M&W coils and run Anti-Lag!!! It doesn't look like your short on cash.
You can always reinstall it on...what ever you like.
You can always reinstall it on...what ever you like.
Thread Starter
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest
Thread Starter
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest
Here are some the kit pix. They will be going up on Raptorforum with some more description in a bit. Not sure on how the turbo will work out, but we do LOTS of testing to see what combo spools the best and makes the best powerband 
http://s275.photobucket.com/albums/j...rbo%20Install/

http://s275.photobucket.com/albums/j...rbo%20Install/
Thread Starter
Joined: Jan 2004
Posts: 11,406
Likes: 78
From: Northwest
It was 23psi, so it made 2whp more than the 2860 but we can push it further so once the 1680 goes in it will go higher. The motor has studs, a Carillo Pro H rod, and Wiseco 11:1 so we arent worried about it holding up 
Pic right after install-

The bike is kind of sitting without plastic still so I am not gonna put up the pix of it naked, when its back together I'll take some updates

Pic right after install-

The bike is kind of sitting without plastic still so I am not gonna put up the pix of it naked, when its back together I'll take some updates






