Well my car car thru a CEL while I was stopped for a bit and the car was just idling. Scaned it and it was a P0102, which is MAF- Circuit Low Input. I reset the ecu and it thru it again as soon as I started it. I have a HKS RS intake and a SAFC II w/ the boomslang harness, so I unplugged the SAFC and reset the ecu again and the code was cleared. I am going to drive it today and see if the code comes back, then try the SAFC again. I'm just wondering if anyone else had the problem?

 

Well, tried plugging in the SAFC again and it was trouble right from the start. First time starting my car it stumbled a bit, then died. Second time it started but as soon as it was running the CEL came back on and I could tell my car was not idling right, it was not a cold start idle at all. So, I unplugged the SAFC, reset the ECU and now it is fine again.....WTF. Anyone have any ideas?

 

that code would be trown if the maf was unpluged. sounds like something is wrong with the harness maybe.

 

Yeah, it is something was the harness or SAFC because the car runs fine with out it plugged in.

 

Gave it one more chance before I took it out and it works now, no CEL. So, given it a week or two and see if it comes back. Still not sure what happened in the first place.....weird.