you have e-mail kats

 

Kats gave me a possible layout for the IX's ECU. I took some time and attempted to either make sense of the diagram or post it on this site for someone else to look at, and I was unsuccessful with BOTH! As such as this sucks, I would appreciate some assistance from anyone who may know the layout of the IX's ECU or where to find a diagram. I have Nada MAS.

 

https://www.evolutionm.net/forums/sh...d.php?t=225258

i used part of kat's file she e-mailed me and made one for the AVCR, if anyone needs the whole file lemme know, i'll try and make one of the entire ecu wiring

 

have you been able to obtain it the wiring diagra for the evo IX

 

i have it on my computer at work... i'll have it in 8 hours when i get there


i hooked up my avic n1 to it and it works... so i have the right one... i think its pin 82 or 84

ill post it up then

cheers!

 

found it fast!

http://www.ttp-engineering.com/TTP.IX.ecu.pdf

cheers!

For those who are lazy pin 80 black/yellow wire in the connector furthest to the right for the speed wire

 

See attached. May not be fully accurate but its what I got.

 

SILEXS ECU CHART IS CORRECT I USE THE SAME CHART AND HAVENT HAD ANY PROBLEMS IVE INSTALLED TURBO TIMERS AND EIDS's on my own and a friends IX's both 06's

 

Thanks guys. I'm going to take a look at this tomorrow and hopefully it'll work. I'll let you know.

 

This is also the one I used for my shift light

 

Thank you!!

 

Can anybody point out the o2 sensor wire on this picture according to the pin chart for the Evo IX posted earlier in this thread.

 

I figured out which o2 sensor wire; if anybody needs any assistance let me know.

 

I need to know where to put a shift light/tach wire on my ix mr.

 

Here is the correct pinout for USDM Evos:

https://www.evolutionm.net/forums/sh...d.php?t=313670